Nikon COOLPIX S810c Product Manual - Page 56

4 Close the card slot cover. If this is the first time the memory card will be used after being used or formatted in another device, format the card as described on page 35. A Memory Card Icons The memory cards currently inserted in the camera are indicated as shown (the example at s right shows the icons displayed when both an XQD and a CompactFlash card are inserted). If the memory card is full or an error has occurred, the icon for the affected card will flash (0 446). Top control panel A Using Two Memory Cards When two memory cards are inserted, you can choose either of the two to serve as the primary card (0 41) and select the role played by the remaining card (0 96). A Removing Memory Cards After confirming that the memory card access lamp is off, turn the camera off and open the memory card slot cover. XQD memory cards: Press the card in to eject it (q). The memory card can then be removed by hand. CompactFlash memory cards: Press the eject button (q) to partially eject the card (w). The memory card can then be removed by hand. Do not push on the memory card while pressing the eject button. Failure to observe this precaution could damage the camera or memory card. 34