Nikon COOLPIX S810c Product Manual - Page 369

f11: Release Button to Use Dial G button ➜ A Custom Settings menu Selecting Yes allows adjustments that are normally made by holding the I (Q), E, D, M, Y, S, T, U, or AF-mode button and rotating a command dial to be made by rotating the command dial after the button is released (this also applies to the Fn and Pv buttons and the Fn button for vertical shooting, if they have been assigned Active D-Lighting using Custom Setting f3, Assign Fn button; 0 337, Custom Setting f4, Assign preview button; 0 342, or Custom Setting f7, Assign Fn button (vert.); 0 343). Setting ends when any of the affected buttons is pressed again or the shutter-release button is pressed halfway. Except when No limit is selected for Custom Setting c2 Standby timer, setting will also end when the standby timer expires. f12: Slot Empty Release Lock G button ➜ A Custom Settings menu Selecting Enable release allows the shutter to be released when no memory card is inserted, although no pictures will be recorded (they will however be displayed in the monitor in demo mode). If Release locked is selected, the shutter-release button is only enabled when a memory card is inserted in the camera. f13: Reverse Indicators G button ➜ A Custom Settings menu If (W) is selected, the exposure indicators in the top control panel and information display are displayed with negative values on the left and positive values on the right. Select (V) to display positive values on the left and negative values on the right. U 347