Nikon D810 Product Manual - Page 340

b4: Easy Exposure Compensation G button ➜ A Custom Settings menu This option controls whether the E button is needed to set exposure compensation (0 130). If On (Auto reset) or On is selected, the 0 at the center of the exposure display will flash even when exposure compensation is set to ±0. Option Description Exposure compensation is set by rotating one of the command dials (see note below). The setting selected On (Auto reset) using the command dial is reset when the camera turns off or the standby timer expires (exposure compensation settings selected using the E button are not reset). As above, except that the exposure compensation On value selected using the command dial is not reset when the camera turns off or the standby timer expires. Off Exposure compensation is set by pressing the E button and rotating the main command dial. A Change Main/Sub The dial used to set exposure compensation when On (Auto reset) or On is selected for Custom Setting b4 (Easy exposure compensation) depends on the option selected for Custom Setting f9 (Customize command dials) > Change main/sub (0 351). Exposure mode Customize command dials > Change main/sub Off On e Sub-command dial Sub-command dial f Sub-command dial Main command dial g Main command dial Sub-command dial h N/A 316