Nikon D810 Product Manual - Page 463
Remote Cord MC-36/MC-36A, Extension Cord MC-21/MC-21A
View all Nikon D810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 463 highlights
Remote terminal accessories The D810 is equipped with a ten-pin remote terminal (0 3) for remote control and automatic photography. The terminal is provided with a cap, which protects the contacts when the terminal is not in use. The following accessories can be used (all lengths are approximate): • Remote Cord MC-22/MC-22A: Remote shutter release with blue, yellow, and black terminals for connection to a remote shutter-triggering device, allowing control via sound or electronic signals (length 1 m/3 ft 3 in.). • Remote Cord MC-30/MC-30A: Remote shutter release; can be used to reduce camera shake (length 80 cm/2 ft 7 in.). • Remote Cord MC-36/MC-36A: Remote shutter release; can be used for interval timer photography or to reduce camera shake or keep the shutter open during a time exposure (length 85 cm/2 ft 9 in.). • Extension Cord MC-21/MC-21A: Can be connected to ML-3 or MC-series 20, 22, 22A, 23, 23A, 25, 25A, 30, 30A, 36, or 36A. Only one MC-21 or MC-21A can be used at a time (length 3 m/9 ft 10 in.). • Connecting Cord MC-23/MC-23A: Connects two cameras with ten-pin remote terminals for simultaneous operation (length 40 cm/1 ft 4 in.). • Adapter Cord MC-25/MC-25A: Ten-pin to two-pin adapter cord for connection to devices with two-pin terminals, including the MW-2 radio control set, MT-2 intervalometer, and ML-2 modulite remote control set (length 20 cm/8 in.). • WR Adapter WR-A10: An adapter used to connect WR-R10 wireless remote controllers (0 441) to cameras with ten-pin remote terminals. • GPS Unit GP-1/GP-1A (0 233): Record latitude, longitude, altitude, and UTC time with pictures. 439