Nikon EN-EL9 D5000 User's Guide (English) - Page 64
Shooting in Live View Mode, Exposure delay, Using Autofocus in Live View
UPC - 689466146493
View all Nikon EN-EL9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
D Shooting in Live View Mode To prevent light entering via the viewfinder from interfering with exposure, remove the rubber eyecup and cover the viewfinder with the supplied DK-5 eyepiece cap before shooting. Although they will not appear in the final picture, banding or distortion may be visible in the monitor under fluorescent, mercury vapor, or sodium lamps or if the camera is panned horizontally or an object moves at high speed through frame. Bright light sources may leave after-images in the monitor when the camera is panned. Bright spots may also appear. When shooting in live view mode, avoid pointing the camera at the sun or other strong light sources. Failure to observe this precaution could result in damage to the camera's internal circuitry. Live view shooting ends automatically if the monitor is closed or the lens is removed. x Live view mode can be used for up to an hour. Note, however, that when used in live view mode for extended periods, the temperature of the camera's internal circuits may rise, resulting in image noise and unusual colors (the camera may also become noticeably warm, but this does not indicated a malfunction). To prevent damage to the camera's internal circuits, live view shooting will end automatically before the camera overheats. A countdown display will appear in the monitor 30 s before shooting ends. At high ambient temperatures, this display may appear immediately when live view mode is selected. During live view, the camera displays the shutter speed and aperture in effect at the start of live view. Exposure is metered again when the shutter-release button is pressed all the way down. To reduce blur when using a tripod, choose On for Custom Setting d5 (Exposure delay mode). D Using Autofocus in Live View Autofocus is slower in live view. The camera may be unable to focus in the following situations: • The subject contains lines parallel to the long edge of the frame • The subject lacks contrast • The subject in the focus point contains areas of sharply contrasting brightness, or the subject is lit by spot lighting or by a neon sign or other light source that changes in brightness • A cross (star) filter or other special filter is used • The subject appears smaller than the focus point • The subject is dominated by regular geometric patterns (e.g., windows in a skyscraper) • The subject is moving Note that the focus point may sometimes be displayed in green when the camera is unable to focus. 46