Nokia IP385 Installation Guide - Page 80
Configuring Software to Use Hardware Acceleration
View all Nokia IP385 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
6 Installing and Replacing Other Components Configuring Software to Use Hardware Acceleration Use Network Voyager to configure virtual private network (VPN) tunnels to use hardware acceleration. This step is necessary for both the built-in hardware accelerators and for the optional encryption accelerator card on the IP380 appliance. The way you enable the software depends on whether you create VPN tunnels with Network Voyager or with Check Point software. If you use Network Voyager to create a VPN tunnel, see "To configure IPsec" on page 72. If you use Check Point software to create a VPN tunnel, see "To configure Check Point VPN" on page 72. To configure IPsec 1. Start Nokia Network Voyager for your appliance. 2. On the Network Voyager home page, click Config. 3. Under Interfaces, click IPSec. 4. Scroll down and click IPSec Advanced Configuration. 5. At Hardware Device Configuration, click On. 6. Click Apply to enable the card. To configure Check Point VPN 1. Start Nokia Network Voyager for your appliance. 2. On the Network Voyager home page, click Config. 3. Scroll down to Security and Access Configuration and click Cryptographic Hardware Acceleration. 4. At Hardware Device Configuration, click On. 5. Click Apply to enable the card. You can also monitor Nokia encryption accelerator card interfaces by using Nokia Network Voyager. For more information about accessing Nokia 72 Nokia IP300 Series Security Platform Installation Guide