NordicTrack 1500 S Instruction Manual - Page 11
start all four
View all NordicTrack 1500 S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
9. Set the console assembly (H) face down on a soft surface to avoid scratching the console assembly. Remove and discard the four indicated screws (I). Then, remove the Pulse Crossbar (80). Next, identify the Left and Right Trays (94, 101). Attach the Trays to the console assembly (H) with eight #8 x 1/2" Screws (11). Do not overtighten the Screws. 9 11 101 11 11 H 94 I 80 I I 10. IMPORTANT: To avoid damaging the Pulse Crossbar (80), do not use power tools, and do not overtighten the #10 x 3/4" Screws (6) or 10 2 6 the 5/16" x 2" Screws (2). 8 Orient the Pulse Crossbar (80) as shown. Attach the Pulse Crossbar to the Handrails (74) with two 74 5/16" x 2" Screws (2), two 5/16" Star Washers 2 (8), and two #10 x 3/4" Screws (6); start all four Screws, and then tighten them. Then, tighten the other two 5/16" x 2" Screws (2). 80 2 6 8 2 74 11