NordicTrack 1500 S Instruction Manual - Page 28
How To Use The Sound System With
View all NordicTrack 1500 S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
HOW TO USE THE SOUND SYSTEM WITH A BLUETOOTH DEVICE 1. Place or hold your Bluetooth-enabled device near the console. 2. Turn on your device's Bluetooth setting. 3. Pair your device to the console. Press and hold the Bluetooth button on the console's speaker grill for 3 seconds. The Bluetooth speakers will enter pairing mode. When your device and the console pair successfully, the audio from your device will play through the console's speakers. Note: The console can save eight devices in its memory. If you have previously paired your device to the console, you can simply press the Bluetooth button to connect your device to the console. 4. Erase the console's device memory if necessary. If you need to erase all the Bluetooth-enabled devices saved in the console's memory, press and hold the Bluetooth button for 10 seconds. HOW TO USE THE SOUND SYSTEM WITH AN AUDIO CABLE To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your personal audio player; make sure that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store. Next, press the play button on your personal audio player. Adjust the volume level using the volume increase and decrease buttons on the console or the volume control on your personal audio player. HOW TO CONNECT AN HDMI CABLE To show your console screen on a TV or monitor, plug an HDMI cable (not included) into the port (D) on the console and into a port on your TV or monitor; make sure that the HDMI cable is fully plugged in. Note: To purchase an HDMI cable, see your local electronics store. D HOW TO USE THE TABLET HOLDER IMPORTANT: The tablet holder (E) is designed for use with most full-size tablets. Do not place any other electronic device or object in the tablet holder. To insert a tablet into the tablet holder (E), set the bottom edge E of the tablet in the tray. Then, pull the clip over the top edge of the tablet. Make sure that the tablet is firmly secured in the tablet holder. Reverse these actions to remove the tablet from the tablet holder. ETNT24717 28