NordicTrack 1500 S Instruction Manual - Page 12
May Become Damaged When You Turn
View all NordicTrack 1500 S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
11. W ith the help of a second person, hold the console assembly (H) near the Handrails (74). 11 See the inset drawing. Connect the Upright Wire (83) to the console wire (J). The connec- tors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. H Next, connect the ground wire (K) from the con- sole assembly (H) to the Console Ground Wire (32). J Then, remove any wire ties (L) from the Upright 83 Wire (83). 74 L 12. Attach the console assembly (H) to the Handrails (74) with four 5/16" x 2" Screws (2) and four 12 5/16" Star Washers (8); start all four Screws, and then tighten them. Be careful not to pinch the wires (J). Then, insert the wires (J) into the top of the Right Upright (84). 74 J 8 84 2 13. Start eight #8 x 3/4" Truss Head Screws (24) into the Pulse Crossbar (80), and then tighten them; 13 do not overtighten the Truss Head Screws. K 32 J 83 H 74 8 2 80 24 24 24 24 12