NordicTrack E5 Si Elliptical English Manual - Page 10
Attach the Right Pedal 35 to the Right Link
 |
View all NordicTrack E5 Si Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10. Tip: Avoid pinching the wire harnesses. While another person holds the Console (11) near the Upright (10), connect the console wire harness to the Upper Wire Harness (65). Attach the Console (11) to the Upright (10) with four M4 x 16mm Blunt Screws (33). 10 Avoid pinching the wire harnesses 10 11 65 33 Console Wire Harness 33 11. Identify the Right Pedal (35) and the Right Link Arm (98), which are marked with "R" stickers, 11 and orient them as shown. Attach the Right Pedal (35) to the Right Link Arm (98) with three M8 x 45mm Patch Screws (90), three M8 Split Washers (97), and three M8 x 23mm Washers (31). Repeat this step for the Left Pedal (not shown) and the Left Link Arm (not shown). 35 98 31 31 97 97 90 10
-
1 -
2
-
3
-
4
-
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
10
11. Identify the Right Pedal (35) and the Right Link
Arm (98), which are marked with “R” stickers,
and orient them as shown.
Attach the Right Pedal (35) to the Right Link
Arm (98) with three M8 x 45mm Patch Screws
(90), three M8 Split Washers (97), and three M8
x 23mm Washers (31).
Repeat this step for the Left Pedal (not
shown) and the Left Link Arm (not shown).
11
35
31
31
97
97
90
98
10.
Tip: Avoid pinching the wire harnesses.
While another person holds the Console (11)
near the Upright (10), connect the console wire
harness to the Upper Wire Harness (65).
Attach the Console (11) to the Upright (10) with
four M4 x 16mm Blunt Screws (33).
10
33
33
Console Wire
Harness
11
10
Avoid pinching the
wire harnesses
65