NordicTrack E5 Si Elliptical English Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own Phillips screwdriver wrench , and rubber mallet . , adjustable As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled. Wave Washer (80)-2 Large Wave Washer (89)-4 M8 Washer (39)-4 M8 x 23mm Thin Washer (96)-4 M8 x 23mm Washer (31)-8 M8 Split Washer (97)-16 M10 Split Washer (99)-4 M4 x 16mm Blunt Screw (33)-6 M4 x 16mm Round Head Screw (92)-19 M8 x 19mm Patch Screw (86)-6 M8 x 23mm Shoulder Screw (45)-4 M8 x 14mm Patch Screw (84)-6 M8 x 45mm Patch Screw (90)-6 M10 x 80mm Button Screw (93)-4 5