NordicTrack E5 Si Elliptical English Manual - Page 7
Tip: Avoid pinching the Wire Harnesses, Do not tighten the Patch Screws yet., Avoid pinching the,
 |
View all NordicTrack E5 Si Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4. Tip: Avoid pinching the Wire Harnesses (64, 65). 4 While another person holds the Upright (10) near the Frame (1), connect the Upper Wire Harness (65) to the Lower Wire Harness (64). Then, insert the Upright (10) into the Frame (1). Attach the Upright with four M8 x 19mm Patch Screws (86) and four M8 Split Washers (97). Do not tighten the Patch Screws yet. 10 97 86 97 1 Avoid pinching the Wire Harnesses (64, 65) 65 64 97 86 97 5. Orient the Left and Right Upright Covers (19, 20) as shown. Then, attach the Upright Covers around the Upright (10) with five M4 x 16mm Round Head Screws (92). 5 92 19 10 20 92 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
7
4.
Tip: Avoid pinching the Wire Harnesses
(64, 65).
While another person holds the Upright (10)
near the Frame (1), connect the Upper Wire
Harness (65) to the Lower Wire Harness (64).
Then, insert the Upright (10) into the Frame (1).
Attach the Upright with four M8 x 19mm Patch
Screws (86) and four M8 Split Washers (97).
Do not tighten the Patch Screws yet.
10
1
97
97
97
97
86
86
64
65
4
Avoid pinching the
Wire Harnesses (64, 65)
5.
Orient the Left and Right Upright Covers (19,
20) as shown. Then, attach the Upright Covers
around the Upright (10) with five M4 x 16mm
Round Head Screws (92).
5
19
20
10
92
92