NordicTrack E8100 Competition English Manual - Page 8
Insert the Long Pad Tube 130 into the Front Leg
 |
View all NordicTrack E8100 Competition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
6. Attach the Seat (116) to the Bench Frame (107) with two M6 x 65mm Screws (120) and two M6 6 Washers (61). 116 61 107 120 7. Grease the barrel of an M10 x 107mm Bolt Set (106). Attach the Leg Lever (110) to the Front Leg 7 (109) with the Bolt Set. Make sure that the bar- rel of the Bolt Set is inserted through both sides of the bracket on the Leg Lever. 106 110 106 109 8. Insert the Long Pad Tube (130) into the Front Leg (109). Slide two Foam Pads (128) onto the Long Pad Tube. Then, press a 19mm Round Cap (134) into each Foam Pad. 8 134 128 109 130 128 134 8
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
8
6.
Attach the Seat (116) to the Bench Frame (107)
with two M6 x 65mm Screws (120) and two M6
Washers (61).
116
61
107
120
6
106
106
109
7
110
7.
Grease the barrel of an M10 x 107mm Bolt Set
(106). Attach the Leg Lever (110) to the Front Leg
(109) with the Bolt Set.
Make sure that the bar-
rel of the Bolt Set is inserted through both
sides of the bracket on the Leg Lever.
8.
Insert the Long Pad Tube (130) into the Front Leg
(109). Slide two Foam Pads (128) onto the Long
Pad Tube. Then, press a 19mm Round Cap (134)
into each Foam Pad.
128
128
134
134
8
130
109