NordicTrack Elite 2500 English Manual - Page 13
Screws 5. The #8 x 3/4 Truss Head Screws, Truss Head Screws with the #8 x 3/4
View all NordicTrack Elite 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
13. Set the Left Handrail Top Cover (73) on the left Handrail (74). Start four #8 x 3/4" Truss Head Screws (24) into the Left Handrail Bottom Cover (75), the left Handrail, and the Left Handrail Top Cover. Next, slide the Left Handrail Top and Bottom Covers forward against the console assembly (B) as shown. Then, tighten all four Screws. IMPORTANT: Do not confuse the #8 x 3/4" Truss Head Screws with the #8 x 3/4" Screws (5). The #8 x 3/4" Truss Head Screws have flatter heads. Attach the Right Handrail Top and Bottom Covers (81, 82) to the right Handrail (74) as described above. 13 B 73 74 75 24 24 81 74 82 24 24 14. Raise the Frame (52) to the position shown. Have a second person hold the Frame until 14 step 15 is completed. Orient the Storage Latch (56) so that the decal is facing away from the treadmill as shown. H 52 Attach the lower end of the Storage Latch (56) to 56 the bracket on the Upright (84) with a 5/16" x 1 3/4" Bolt (3) and a 5/16" Nut (9). Raise the Storage Latch (56) to a vertical position. Then, remove and discard the tie (H). Decal 9 84 3 13