NordicTrack Elite 2500 English Manual - Page 9

Truss Head Screws have flatter heads., Start all four

Get NordicTrack Elite 2500 PDF manuals and user guides View all NordicTrack Elite 2500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

4. Remove and discard the four indicated screws (A). Remove the Tray (79) from the Upright 4 Crossbar (76). A 76 A 79 5. Carefully slide the Upright Crossbar (76) between the Uprights (84). Attach the Upright 5 Crossbar with four 5/16" x 3/4" Screws (1). Start all four Screws, and then tighten them. 1 84 76 1 84 6. Hold the Tray (79) near the right Upright (84). Wrap the tie in the hole in the side of the right 6 B Upright around the end of the fan wire (B). Next, 79 pull the fan wire into the hole and out of the top of the right Upright. Then, remove the tie. Identify the #8 x 3/4" Screws (5). IMPORTANT: Do not confuse the #8 x 3/4" Screws with the Hole #8 x 3/4" Truss Head Screws (24). The #8 x 3/4" Truss Head Screws have flatter heads. Tie 5 76 5 Attach the Tray (79) to the Upright Crossbar (76) with four #8 x 3/4" Screws (5). Start all four Screws, and then tighten them. 84 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
9
5.
Carefully slide the Upright Crossbar (76)
between the Uprights (84). Attach the Upright
Crossbar with four 5/16" x 3/4" Screws (1).
Start
all four Screws, and then tighten them.
5
84
1
76
84
1
6.
Hold the Tray (79) near the right Upright (84).
Wrap the tie in the hole in the side of the right
Upright around the end of the fan wire (B). Next,
pull the fan wire into the hole and out of the top
of the right Upright. Then, remove the tie.
Identify the #8 x 3/4" Screws (5).
IMPORTANT:
Do not confuse the #8 x 3/4
"
Screws with the
#8 x 3/4" Truss Head Screws (24). The #8 x
3/4" Truss Head Screws have flatter heads.
Attach the Tray (79) to the Upright Crossbar (76)
with four #8 x 3/4" Screws (5).
Start all four
Screws, and then tighten them.
6
5
84
B
76
5
79
Hole
Tie
4.
Remove and discard the four indicated screws
(A). Remove the Tray (79) from the Upright
Crossbar (76).
4
76
A
A
79