NordicTrack Elite 3750 Treadmill User Manual - Page 15

Attach the Right Handrail Top and Bottom

Get NordicTrack Elite 3750 Treadmill PDF manuals and user guides View all NordicTrack Elite 3750 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

15. Set the Left Handrail Top Cover (73) on the left Handrail (74). Start four #8 x 3/4" Truss Head Screws (24) into the Left Handrail Bottom Cover (75), the left Handrail, and the Left Handrail Top Cover. Next, slide the Left Handrail Top and Bottom Covers forward against the console assembly (H) as shown. Then, tighten all four Truss Head Screws. Attach the Right Handrail Top and Bottom Covers (81, 82) to the right Handrail (74) as described above. 15 H 73 74 75 24 24 81 74 82 24 24 16. Raise the Frame (52) to the upright position. IMPORTANT: Do not raise the Frame past the vertical position. Have a second person hold the Frame until step 18 is completed. Remove the two 5/16" x 1 1/4" Screws (16) from the Latch Crossbar (97). Orient the Latch Crossbar (97) as shown. Make sure that the "This side toward belt" sticker (K) is facing the treadmill. Attach the Latch Crossbar (97) to the brackets (L) on the Frame (52) with the two 5/16" x 1 1/4" Screws (16) and two 5/16" Star Washers (8). 16 8 16 52 L K 97 L 8 16 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
15
15. Set the Left Handrail Top Cover (73) on the left
Handrail (74). Start four #8 x 3/4" Truss Head
Screws (24) into the Left Handrail Bottom Cover
(75), the left Handrail, and the Left Handrail
Top Cover. Next, slide the Left Handrail Top
and Bottom Covers forward against the console
assembly (H) as shown. Then, tighten all four
Truss Head Screws.
Attach the Right Handrail Top and Bottom
Covers (81, 82) to the right Handrail (74) as
described above.
24
24
24
24
15
82
74
75
74
81
73
H
16.
Raise the Frame (52) to the upright position.
IMPORTANT: Do not raise the Frame past the
vertical position. Have a second person hold
the Frame until step 18 is completed.
Remove the two 5/16" x 1 1/4" Screws (16) from
the Latch Crossbar (97).
Orient the Latch Crossbar (97) as shown.
Make
sure that the “This side toward belt” sticker
(K) is facing the treadmill.
Attach the Latch Crossbar (97) to the brackets
(L) on the Frame (52) with the two 5/16" x 1 1/4"
Screws (16) and two 5/16" Star Washers (8).
52
97
K
8
8
16
16
L
16
L