NordicTrack Elite 3750 Treadmill User Manual - Page 17
IMPORTANT: The Tablet Holder 58 is
View all NordicTrack Elite 3750 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
19. Firmly tighten the four 3/8" x 2 3/4" Screws (23) and the four 3/8" x 1 1/4" Screws (20). 19 Next, slide the Left and Right Base Covers (89, 90) down until they snap into place. 90 89 23 20 20. Attach the Tablet Holder (58) to the console assembly (H) with four M4 x 16mm Screws (108). Note: Start the two top Screws first, and then start the two bottom Screws. Be careful not to overtighten the Screws. IMPORTANT: The Tablet Holder (58) is designed for use with most full-size tablets. Do not place any other electronic device or object in the Tablet Holder. 23 23 20 20 Start First 108 58 108 H 21. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 31 and 32). Note: Extra parts may be included. 17