NordicTrack Grt950 English Manual - Page 7
Arm Assembly
View all NordicTrack Grt950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4. Press the 75mm x 50mm Spacer (48) into the 4 82mm x 57mm Outer Cap (26). Press the Outer Cap onto the Hack Squat Leg (2). Attach the Hack Squat Leg (2) to the two M10 x 67mm Carriage Bolts (33) in the Hack Squat Base (1) with two M10 Locknuts (32). Attach the Hack Squat Leg (2) to the Hack Squat Upright (4) with two M10 x 95mm Bolts (38), two M10 Washers (36), and two M10 Locknuts (32). Tighten the M10 Locknuts (32) used in steps 3 and 4. Arm Assembly 5 5. Press two 75mm x 50mm Inner Caps (21) into the Hack Squat Bracket (3). Press four 34mm Bushings (14) into the Hack Squat Bracket. Attach the Hack Squat Bumper (16) to the Hack Squat Bracket (3) with an M4 Washer (37) and an M4 x 20mm Screw (29). 6. Press two 34mm x 19mm Bushings (13) into the 6 Hack Squat Upright (4). Attach the Hack Squat Bracket (3) to the Hack Squat Upright (4) with a 25mm x 86mm Pivot Rod (15), two M10 Large Washers (30), and two M10 x 25mm Bolts (31). 26 32 48 32 4 38 36 2 32 29 37 16 21 32 1 33 14 14 21 3 31 30 13 13 30 15 31 7. Press a 75mm x 50mm Inner Cap (21) into the end of the Hack Squat Frame (5). Press a 50mm x 40mm Inner Cap (22) into the bottom of the 7 backrest tube on the Frame. Press two 34mm x 19mm Bushings (13) into the Hack Squat Frame. Slide two Foam Pads (7) onto the Hack Squat Frame (5). Attach the Release Handle (10) to the Hack Squat Frame (5) with an M6 x 25mm Allen Head Screw (28). Slide the Handgrip (8) and the Long Handgrip (9) onto the indicated handles of the Hack Squat Frame (5). Press two 25mm Round Inner Caps (42) into the handles on the Frame. 7 13 5 22 7 10 9 42 8 28 42 21 13