NordicTrack Grt950 English Manual - Page 9

12. Route the Hack Squat Cable (20) around the 12 other Pulley (19) attached to the Hack Squat Base (1) in step 10, and through the Hack Squat Leg (2). 13. Route the Hack Squat Cable (20) under a Pulley 13 (19) and through the Hack Squat Upright (4). Attach the Pulley inside the Upright with an M10 x 65mm Bolt (35), two 15mm x 12mm Spacers (17), two M10 Washers (36), and an M10 Locknut (32). 14. Wrap the Hack Squat Cable (20) around a Pulley 14 (19). Attach the Pulley and a Cable Trap (18) to the left hole in the top of the Hack Squat Upright (4) with an M10 x 125mm Bolt (41), a 15mm x 8mm Spacer (46), an M10 Washer (36), and an M10 Locknut (32). Wrap the Hack Squat Cable (20) around another Pulley (19). Attach the Pulley and a Cable Trap (18) to the other hole in the Hack Squat Upright (4) in the same manner. Make sure the Cable Traps (18) are positioned to hold the Hack Squat Cable (20) in the grooves of the Pulleys (19). 15. Attach the end of the Hack Squat Cable (20) to 15 the end of the rear cable (F) with a Cable Clip (34). 1 19 20 2 40 32 4 20 36 17 35 19 18 19 41 46 36 32 36 Left Hole 4 18 46 20 20 34 F 9