NordicTrack Netl20717 Instruction Manual - Page 8
do not fully tighten the Screws yet.
View all NordicTrack Netl20717 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. Lay the Right Upright (84) near the Base (93). Press the Upright Grommet (86) into the square 3 hole (B) in the Right Upright. Make sure not to pinch the ground wire (C). If there is a screw (D) preattached to the Right Upright (84), remove and discard it. Then, attach the ground wire (C) to the Right Upright (84) with a #8 x 1/2" Ground Screw (7). 4. Hold the Right Upright (84) against the Base (93). Make sure not to pinch the Upright Wire (83). Attach the Right Upright (84) with two 3/8" x 2 3/4" Screws (23), two 3/8" x 1 1/4" Screws (20), and four 3/8" Star Washers (25) as shown; do not fully tighten the Screws yet. Attach the Left Upright (not shown) in the same way. Note: There are no wires on the left side. 4 23 25 93 7 86 C D B 84 23 25 83 93 25 20 84 25 20 8