NordicTrack Ntevel69818 Instruction Manual - Page 27
HOW TO ADJUST THE REED SWITCH, unplug the power adapter.
View all NordicTrack Ntevel69818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, first unplug the power adapter. Next, using a standard screwdriver, carefully pry off the left Disc (71). 71 Next, slightly loosen the indicated two M4 x 12mm Self-tapping Screws (50). Slide the Reed Switch (38) slightly closer to or away from the Magnet (43), and then retighten the Self-tapping Screws. Then, plug in the power adapter and rock the Pulley (19) forward and backward just enough that the Magnet (43) passes the Reed Switch (38) repeatedly. Repeat these actions until the console displays correct feedback. When the reed switch is correctly adjusted, reattach the left disc and plug in the power adapter. Next, locate the Reed Switch (38). Turn the Pulley (19) until a Magnet (43) is aligned with the Reed Switch. 50 38 43 19 27