NordicTrack Ntevel69818 Instruction Manual - Page 28
HOW TO ADJUST THE DRIVE BELT, unplug the power adapter.
View all NordicTrack Ntevel69818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
HOW TO ADJUST THE DRIVE BELT If the pedals slip while you are pedaling, even while the resistance is adjusted to the highest level, the drive belt may need to be adjusted. To adjust the drive belt, first unplug the power adapter. Next, locate the Access Cover (3) on the Right Shield (74). Remove the M4 x 16mm Screw (101) and then remove the Access Cover. Next, locate and loosen the Idler Screw (89). Tighten the Drive Belt Adjustment Screw (91) until the Drive Belt (113) is tight. Then, retighten the Idler Screw. 113 89 91 When the drive belt is propery adjusted, reattach the parts that you removed. Then, plug in the power adapter. 3 74 101 28
28
HOW TO ADJUST THE DRIVE BELT
If the pedals slip while you are pedaling, even while
the resistance is adjusted to the highest level, the drive
belt may need to be adjusted. To adjust the drive belt,
first
unplug the power adapter.
Next, locate the
Access Cover
(3) on the Right
Shield (74).
Remove the
M4 x 16mm
Screw (101) and
then remove the
Access Cover.
Next, locate
and loosen the
Idler Screw (89).
Tighten the Drive
Belt Adjustment
Screw (91) until
the Drive Belt
(113) is tight.
Then, retighten
the Idler Screw.
When the drive belt is propery adjusted, reattach
the parts that you removed. Then, plug in the power
adapter.
74
3
101
113
91
89