NordicTrack R 65 Uk Manual - Page 25

HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. Before you adjust the reed switch, unplug the power adapter. Note: For clarity, the left pedal is shown removed in the drawing below. Note: For clarity, the left shield cover is shown removed in the drawing below. Locate the Reed Switch (35). Rotate the Left Crank Arm (100) until a Magnet (39) is aligned with the Reed Switch. Next, loosen the clamp screw (A), slide the Reed Switch slightly toward or away from the Magnet, and then retighten the clamp screw. Using a small standard (flat) screwdriver, carefully pry the left Crank 24 Cover (25) off the left Shield 25 Cover (24). Next, remove the two M5 x 20mm Screws (not shown). Then, rotate the left Shield Cover out of the way. 39 A 35 100 Plug in the power adapter and rotate the Left Crank Arm (100) for a moment. Repeat these actions until the console displays correct feedback. When the reed switch is correctly adjusted, reattach the parts that you removed. 25