NordicTrack R 65 Uk Manual - Page 6
ASSEMBLY, Attach the Front Stabilizer 2 to the Frame 1
View all NordicTrack R 65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 5. In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.iconsupport.eu on your computer and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Service • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call Customer Service (see the front cover of this manual) and register your product. 2. If there is a shipping bracket on the front of the Frame (1), remove the screws from the shipping 2 bracket, and discard the screws and the shipping bracket. With the help of a second person, place some of the packing materials (not shown) under the front of the Frame (1). Attach the Front Stabilizer (2) to the Frame (1) with two M10 x 96mm Screws (110); start both Screws, and then tighten them. Then, remove the packing material from under the Frame (1). 2 110 1 6