NordicTrack Vgr 940 Uk Manual - Page 14

HOW TO CONNECT YOUR HOME STEREO HOW TO CONNECT YOUR COMPUTER Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. Note: If your computer has a 3.5mm LINE OUT jack, see instruction A. If your computer has only a PHONES jack, see instruction B. A. Plug one end of the audio cable into the jack beneath the console of the elliptical crosstrainer. Plug the other end of the cable into the included adaptor. Plug the adaptor into the LINE OUT jack on your stereo. A CD VCR Amp LINE OUT LINE OUT A. Plug one end of the audio cable into the jack beneath the console of the elliptical crosstrainer. Plug the other end of the cable into the LINE OUT jack on your computer. A LINE OUT Audio Cable Adaptor Audio Cable B. Plug one end of the audio cable into the jack beneath the console of the elliptical crosstrainer. Plug the other end of the cable into the included adaptor. Plug the adaptor into an RCA Y-adaptor (available at electronics stores). Next, remove the wire that is currently plugged into the LINE OUT jack on your stereo and plug the wire into the unused side of the RCA Y-adaptor. Plug the RCA Y-adaptor into the LINE OUT jack on your stereo. B CD VCR Amp LINE OUT Audio Cable RCA Y-Adaptor Adaptor B. Plug one end of the audio cable into the jack beneath the console of the elliptical crosstrainer. Plug the other end of the cable into a 3.5mm Yadaptor (available at electronics stores). Plug the Yadaptor into the PHONES jack on your computer. Plug your headphones or speakers into the other side of the Y-adaptor. B PHONES Audio Cable 3.5mm Y-Adaptor Headphones/Speakers Wire removed from LINE OUT jack 14