NordicTrack Vgr 940 Uk Manual - Page 5

ASSEMBLY Assembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the two included allen wrenches, assembly requires a phillips screwdriver , an adjustable spanner , and a rubber mallet . As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 18. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled. M8 Split M10 Nylon Locknut (26)-6 Washer (58)-2 M8 Washer (33)-2 Chrome Tube Washer (84)-2 Plastic Pedal Spacer (85)-2 Front Stabilizer Bolt (86)-2 Pedal Screw (43)-6 Rear Stabilizer Bolt (60)-2 Incline Axle Screw (30)-2 1. Identify the Rear Stabiliser (59), which has Wheels (45) attached to it. 1 Attach the Rear Stabiliser (59) to the rear of the Frame (1) with the two Rear Stabiliser Bolts (60) and two M10 Nylon Locknuts (26). Make sure that the Rear Stabiliser is turned so the Wheels are not touching 26 the floor. 1 26 59 45 2. Attach the Front Stabiliser (14) to the front of the Frame (1) with the two Front Stabiliser Bolts (86) and 2 two M10 Nylon Locknuts (26). 86 14 26 60 26 1 5