NordicTrack Walkfit 3500 Treadmill English Manual - Page 15

Lubricate, Treadmill

Page 15 highlights

Lubricate the Treadmill Peck Items Needed Time Required ■ Clean, Dry Cloth ■ Treadmill Lubricant ■ 15 Minutes Before You Begin Use lubricant obtained only through NordicTrack. 'AIMPORTANT Other lubricants may damage the treadmill deck or belt. Do not use silicone spray lubricant. ■ Check to see if there's still lubricant on the deck. If the surface of the deck is dry or if the belt resistance has increased, apply lubrication. ■ Place a protective covering under the machine. We also recommend the protective covering during usage. ■ Wipe the entire treadmill deck and belt with a clean, dry cloth to remove dust and dirt. Apply Lubricant ( A CAUTION Avoid direct contact with eyes. If contact occurs, flush immediately with large amounts of water. Wash hands after each use. Do not take internally: Keep out of reach of children. 1. Lift the treadmill belt and squirt 1/4 of the packet contents onto the treadmill deck in a straight line the length of the deck where your right foot would travel if you ►were walking on the belt. Be careful not to get lubricant on the top surface of the treadmill belt. if lubricant does get on the top surface of the belt, do not use the exerciser until the lubricant has been removed with a clean, dry cloth. 2. Repeat step 1 with 1/4 of the lubricant onto the treadmill deck where your left foot would travel if you were walking on the belt. Treadmill Belt Apply to Deck Underneath Belt Protective Covering 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

Lubricate
the
Treadmill
Peck
Items
Needed
Clean,
Dry
Cloth
Treadmill
Lubricant
Before
You
Begin
Time
Required
15
Minutes
'A
IMPORTANT
Use
lubricant
obtained
only
through
NordicTrack.
Other
lubricants
may
damage
the
treadmill
deck
or
belt.
Do
not
use
silicone
spray
lubricant.
Check
to
see
if
there's
still
lubricant
on
the
deck.
If
the
surface
of
the
deck
is
dry
or
if
the
belt
resistance
has
increased,
apply
lubrication.
Place
a
protective
covering
under
the
machine.
We
also
recommend
the
protective
covering
during
usage.
Wipe
the
entire
treadmill
deck
and
belt
with
a
clean,
dry
cloth
to
remove
dust
and
dirt.
Apply
Lubricant
(
A
CAUTION
Avoid
direct
contact
with
eyes.
If
contact
occurs,
flush
immediately
with
large
amounts
of
water.
Wash
hands
after
each
use.
Do
not
take
internally:
Keep
out
of
reach
of
children.
1.
Lift
the
treadmill
belt
and
squirt
1/4
of
the
packet
contents
onto
the
treadmill
deck
in
a
straight
line
the
length
of
the
deck
where
your
right
foot
would
travel
if
you
►were
walking
on
the
belt.
Be
careful
not
to
get
lubricant
on
the
top
surface
of
the
treadmill
belt.
if
lubricant
does
get
on
the
top
surface
of
the
belt,
do
not
use
the
exerciser
until
the
lubricant
has
been
removed
with
a
clean,
dry
cloth.
2.
Repeat
step
1
with
1/4
of
the
lubricant
onto
the
treadmill
deck
where
your
left
foot
would
travel
if
you
were
walking
on
the
belt.
Treadmill
Belt
Apply
to
Deck
Underneath
Belt
Protective
Covering
12