NordicTrack Walkfit 3500 Treadmill English Manual - Page 17

Adjust, Treadmill

Get NordicTrack Walkfit 3500 Treadmill PDF manuals and user guides View all NordicTrack Walkfit 3500 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Adjust the Treadmill Belt Items Needed Time Required 5/32-Inch Allen Wrench 5 Minutes If the treadmill belt moves to one side, it can be adjusted. The belt will not stay perfectly centered. Adjust the belt only if you can't see some of the roller on both sides of the belt. NOTE: The two guides beneath the treadmill deck are designed to keep the belt centered. Tice belt is cut. slightly wider than the space between. the two guides, so it may curl clown on each side. This is normal and will not. damage the treadmill belt. Center the Belt 1. If the belt has overlapped the roller on the left side, turn the adjustment bolt on the right counterclockwise and the adjustment bolt on the left clockwise. Turn each bolt equally a quarter turn at a time. 2. If the belt has overlapped the roller on the right side, turn the adjustment bolt on the right clockwise and the adjustment bolt on the left counterclockwise. Turn each bolt equally a quarter turn at a time. 3_ Use your foot to rotate the treadmill belt six to ten times. 4. Repeat the steps above until the belt is centered. 4 Adjustment Bolt 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
Adjust
the
Treadmill
Belt
Items
Needed
5/32
-Inch
Allen
Wrench
Time
Required
5
Minutes
If
the
treadmill
belt
moves
to
one
side,
it
can
be
adjusted.
The
belt
will
not
stay
perfectly
centered.
Adjust
the
belt
only
if
you
can't
see
some
of
the
roller
on
both
sides
of
the
belt.
NOTE:
The
two
guides
beneath
the
treadmill
deck
are
designed
to
keep
the
belt
centered.
Tice
belt
is
cut.
slightly
wider
than
the
space
between.
the
two
guides,
so
it
may
curl
clown
on
each
side.
This
is
normal
and
will
not.
damage
the
treadmill
belt.
Center
the
Belt
1.
If
the
belt
has
overlapped
the
roller
on
the
left
side,
turn
the
adjustment
bolt
on
the
right
counterclockwise
and
the
adjustment
bolt
on
the
left
clockwise.
Turn
each
bolt
equally
a
quarter
turn
at
a
time.
2.
If
the
belt
has
overlapped
the
roller
on
the
right
side,
turn
the
adjustment
bolt
on
the
right
clockwise
and
the
adjustment
bolt
on
the
left
counterclockwise.
Turn
each
bolt
equally
a
quarter
turn
at
a
time.
3_
Use
your
foot
to
rotate
the
treadmill
belt
six
to
ten
times.
4.
Repeat
the
steps
above
until
the
belt
is
centered.
4
Adjustment
Bolt
14