Oki B420dn B410/B420/B430 Setup Guide (e,f,s,p) - Page 5
Load Paper - drum
View all Oki B420dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
4 Hold the cartridge, peel-off side down, with the (blue) knob on the right. Tilt the cartridge slightly and insert the left side under the protrusions (a) on the image drum cartridge. Load Paper 1 Pull out the paper tray. b a 2 Set guides to paper width. 5 Lower the right side, aligning the slot in the toner cartridge with the guide post of the image drum (b). Push the toner cartridge down completely until it snaps into place. 6 Holding the toner cartridge down so it does not pop up (a), turn the (blue) knob (b) in the direction show. Note: The arrow on the knob should align with the arrow on the drum cartridge (c). 3 Adjust guide for paper length. Note: For legal size paper, slide the release lever (a) to the left while pulling out the paper guide to the LGL position. c 7 Close the top cover. a B400 Series Setup Guide 5