Oki B420dn B410/B420/B430 Setup Guide (e,f,s,p) - Page 6

4 Load paper (face down and top edge towards the front for letterhead paper). Be sure guides are snug against the paper and are locked in place. Computer Connection Note: Interface cables are not supplied. Install Network Cable Connect the network cable between the printer network port and the Ethernet hub or router. 5 Close the paper tray. Insert Power Cable Insert the power cable and turn the printer ON. USB Connection Note: If installing for Windows© with USB connection, install the software BEFORE installing the USB cable. See "Install Software" on page 7. Connect the USB cable between the printer USB port and the computer. WARNING! Be sure to use the 15A AC power cord supplied with the printer. Use of a power cord NOT supplied with this printer, or an extension cord, may result in overheating, and could be a safety hazard. CAUTION! To prevent fire or shock hazards, connect the power plug only to a properly rated power outlet. CAUTION! Do not connect this product to an uninterruptible power supply (UPS). For further information please contact Oki Data at 1-800-OKIDATA or www.okidata.com. Parallel Connection Note: Requires UL approved bi-directional (IEEE 1284 compliant) cable. Connect the Parallel cable between the printer's Parallel port and the computer. B400 Series Setup Guide 6