Oki B4300 Network User's Guide for OkiLAN 6020e - Page 128

Section 4 - Chapter 6 - Telnet Configuration Note: If you select an invalid subnet mask you may not be able to access the OkiLAN 6020e. Use this option with care! Identify Default Gateway IP Address (Option 5) If your local network is attached to other networks, you must specify the address of your default gateway. Whenever packets need to be sent to another network, the default gateway is used. The gateway address must follow the format XXX.XXX.XXX.XXX, where each XXX is a number between 0 and 255. When the default gateway is changed, it will remain undetected until the OkiLAN 6020e is reset or is power cycled. Note: If you select an invalid default gateway or the default gateway goes down, the OkiLAN 6020e may not be able to communicate with non-local networks. Configure Port (Option 6) After the Configure menu appears, you can access the following configuration option screens. Specify Configuration Page Language This option enables you to select how the OkiLAN 6020e configuration pages should be printed: Text (default), PCL, PostScript, or OFF. Configure Language Switching This option asks you to select the language of your printer. For a description of language switching options, see pages IV-28 and IV-29. IV - 46 OKI OkiLAN 6020e User's Guide