Oki B4300 Network User's Guide for OkiLAN 6020e - Page 133

Section 4 - Appendix A - Troubleshooting UNIX BOOTP If you are running UNIX, try the following methods with the BOOTP server (check the documentation for your particular UNIX flavor). • Verify the BOOTP server has reread the "/etc/ bootptab" file when the new entry was added. If the BOOTP server was running when you added the new entries, the server might not have reread the new bootptab file. Try sending the SIGHUP signal to the running BOOTP server. For example, kill -HUP tells it to reread "/etc/bootptab". Most BOOTP servers support this option. Check your local BOOTP documentation. If this does not work, restart the BOOTP server (kill and restart the process). • Some BOOTP servers will write their internal bootptab tables to a file when they receive a SIGUSR1 signal. You can check this file to verify the hardware and IP address are correct. You can use the kill command to send signals. For example, kill -USR1 . Check your documentation for more information. • Check the system's syslog file. Some BOOTP servers will write error messages into the syslog file. Example: Sep 6 14:38:43 bootpd[17565]: hardware address not found: 004068175042 This message appears when the BOOTP server received a request from a device not in its internal bootptab tables. TCP/IP OKI OkiLAN 6020e User's Guide IV - 51