Oki B930dn B930 Setup Guide (English Fran栩s Espa?ol Portugu&#40 - Page 6

Finish the Optional Tabloid Tray, or Tandem Tray Installation, Install the Optional Duplexer

Get Oki B930dn PDF manuals and user guides View all Oki B930dn manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Finish the Optional Tabloid Tray or Tandem Tray Installation If you purchased the optional tabloid tray or tandem tray and mounted the printer on it earlier in the installation, you now need to complete the installation. 1. Make sure the printer is turned off. 1. Open each drawer, remove the packing materials, and close the drawer. - Tabloid Tray interface connector (2) and replace the interface access cover (3). 5. Level the unit. - Tandem, Tray 2 3 2 1 1 2. Remove drawer 3 from the printer. Insert the two locking screws and turn them clockwise to secure the tray to the printer. Install the Optional Duplexer 1. Make sure the printer is turned off. 2. Unpack the duplexer (duplex unit [1] and exit module [2]) and remove cushioning materials. 3. Pull the release button to open the front cover. 3. Push the drawer back into the printer. 4. Remove the interface access cover (1) from the back of the printer, connect the tray 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
6
Finish the Optional Tabloid Tray
or Tandem Tray Installation
If you purchased the optional tabloid tray or
tandem tray and mounted the printer on it earlier
in the installation, you now need to complete the
installation.
1.Make sure the printer is turned off.
1.Open each drawer, remove the packing
materials, and close the drawer.
-
Tabloid Tray
-
Tandem, Tray
2.
Remove drawer 3 from the printer. Insert the
two locking screws and turn them clockwise to
secure the tray to the printer.
3.
Push the drawer back into the printer.
4.
Remove the interface access cover (1) from
the back of the printer, connect the tray
interface connector (2) and replace the
interface access cover (3).
5.
Level the unit.
Install the Optional Duplexer
1.Make sure the printer is turned off.
2.
Unpack the duplexer (duplex unit [1] and exit
module [2]) and remove cushioning materials.
3.
Pull the release button to open the front cover.
1
2
1
2
3