Oki C5400 Upgrade Kit Installation Instructions
Oki C5400 Manual
View all Oki C5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Oki C5400 manual content summary:
- Oki C5400 | Upgrade Kit Installation Instructions - Page 1
- Oki C5400 | Upgrade Kit Installation Instructions - Page 2
this publication to: Training & Publications Dept. Oki Data Americas, Inc. 2000 Bishops Gate Blvd. Mt. Laurel, NJ 08054-4620 For the latest product information, printer drivers, manuals, special offers, etc., go to http://my.okidata.com. OKI is a registered trademark/marque déposée/marca registrada - Oki C5400 | Upgrade Kit Installation Instructions - Page 3
also activates the Ethernet port so you can use your printer on a network. Installing the kit involves four steps: • Step 1: Uninstall the C5400 PCL Printer Driver (Windows only) . . p. 2 • Step 2: Install the New DIMM in the Printer p. 3 • Step 3: Make the Network Connection, if applicable p. 11 - Oki C5400 | Upgrade Kit Installation Instructions - Page 4
Systems Only Windows XP and 2000. 1. Click Start → Settings → Printers [Printers and Faxes for XP]. 2. Click the C5400 PCL driver, then click File → Delete. 3. Click Yes to confirm the deletion. 4. Click File → Server Properties. 5. On the Drivers tab, select the C5400 PCL printer driver and click - Oki C5400 | Upgrade Kit Installation Instructions - Page 5
INFORMATION MENU appears. b. Press ENTER twice and wait for the 2-page MenuMap to print. c. Note that C5400 shows at the top of the MenuMap. 2. Prepare the printer: • Turn off the printer (1). • Unplug the power cord (2). • Detach the interface cable (3)-a = USB, b = parallel. 3. Open the top cover - Oki C5400 | Upgrade Kit Installation Instructions - Page 6
4. Open the front cover. 5. Loosen the thumbscrew holding the printer side cover in place. 6. Lift up on the ends and remove the side panel from the printer. 4 - Oki C5400 | Upgrade Kit Installation Instructions - Page 7
7. Locate the DIMM to be replaced. 8. Push out the lock tabs at either end of the DIMM and remove it. Caution! To avoid damage, ground yourself (touch metal) before handling DIMMs. 9. Remove the new DIMM from its shipping package. 5 - Oki C5400 | Upgrade Kit Installation Instructions - Page 8
10. Hold the DIMM with the narrower metallic contact edge (1) to the right, and insert it straight into the socket, pushing in until you hear the lock tabs on either side snap into place. Caution! Keep the DIMM at a 90° angle to the printer: Push the DIMM in straight: 6 - Oki C5400 | Upgrade Kit Installation Instructions - Page 9
11. Replace the side panel on the printer and secure it in place with the thumbscrew. 12. Close the front cover. 13. Close the top cover. 7 - Oki C5400 | Upgrade Kit Installation Instructions - Page 10
14. Loosen the screw and remove the cover (1) from the Ethernet port on the back of the printer. 15. If you will be using the same computer connection rather than the newly available Ethernet connection, reattach the computer interface cable-USB (a) or parallel (b). - Oki C5400 | Upgrade Kit Installation Instructions - Page 11
16. Plug in the power cord, 17. Press and hold the TEST button (1) on the back of the printer while turning on the printer. Hold the button until the message NETWORK INITIAL WAIT A MOMENT appears on the display. This initializes the Ethernet port. 9 - Oki C5400 | Upgrade Kit Installation Instructions - Page 12
Press ENTER twice and wait for the MenuMap to print. c. You should see; • C5400n at the top of the MenuMap • four additional pages entitled "Network Information." d. If the MenuMap printout has not changed, open up the printer and reinstall the DIMM, making sure it is firmly in place, then print the - Oki C5400 | Upgrade Kit Installation Instructions - Page 13
port, skip this step. Note: No Ethernet cable is supplied. Use an Ethernet cable with two twisted wire pairs and an RJ45 plug. 1. Turn the printer off. 2. If there is a plastic plug (1) in the Ethernet port, remove it. 3. Connect your Ethernet cable to the port. 4. Connect the other end of the - Oki C5400 | Upgrade Kit Installation Instructions - Page 14
Step 4: Configure the Network and/or Install the C5400n Driver(s) Windows Operating Systems: PCL and Postscript Emulation Printer Drivers Networks ᮣ TCP/IP, see page 3, ff., in the "Computer Connections & Software Install Guide" supplied with this kit. ᮣ Novell, see page 8, ff., in the "Computer - Oki C5400 | Upgrade Kit Installation Instructions - Page 15
- Oki C5400 | Upgrade Kit Installation Instructions - Page 16
Oki Data Americas, Inc. 2000 Bishops Gate Blvd. Mt. Laurel, NJ 08054-4620 Phone: (800) 654-3282 FAX: (856) 222-5320 www.okidata.com 59364001