Oki C5400 Upgrade Kit Installation Instructions - Page 3
Overview
View all Oki C5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Overview Your Model C5400 Upgrade Kit provides a Postscript emulation driver for Macintosh® and Windows® systems, in addition to the PCL driver for Windows systems. It also activates the Ethernet port so you can use your printer on a network. Installing the kit involves four steps: • Step 1: Uninstall the C5400 PCL Printer Driver (Windows only) . . p. 2 • Step 2: Install the New DIMM in the Printer p. 3 • Step 3: Make the Network Connection, if applicable p. 11 • Step 4: Configure the Network and/or Install Printer Driver(s) . . . p. 12 Caution! To avoid damage by static electricity or rough handling, keep the DIMM board in its packaging until you're ready to install it. Note: You will need a Phillips bit screwdriver to install the kit. 1
1
Overview
Your Model C5400 Upgrade Kit provides a Postscript emulation driver
for Macintosh
®
and Windows
®
systems, in addition to the PCL driver for
Windows systems. It also activates the Ethernet port so you can use your
printer on a network.
Installing the kit involves four steps:
•
Step 1
: Uninstall the C5400 PCL Printer Driver (Windows only) . .
p. 2
•
Step 2
: Install the New DIMM in the Printer . . . . . . . . . . . . . . . . . .
p. 3
•
Step 3
: Make the Network Connection, if applicable . . . . . . . . . . .
p. 11
•
Step 4
: Configure the Network and/or Install Printer Driver(s) . . .
p. 12
Caution!
To avoid damage by static electricity or rough handling, keep the DIMM
board in its packaging until you're ready to install it.
Note:
You will need a Phillips bit screwdriver to install the kit.