Oki C9600n C9600/9800 Safety, Warranty, and Regulatory Information - Page 9

Spill Cleanup Small Spills 1. Remove sources of ignition. 2. Carefully clean up the spill with a wet cloth, avoiding inhalation of fine dust. Large Spills 1. Remove sources of ignition and keep unnecessary and unprotected personnel away from area. 2. Wear protective gear: dust respirator mask, leather gloves, safety goggles. 3. Vacuum or sweep the material into a bag or other sealed container, then wipe up remainder with a wet cloth. Waste Disposal • Prevent release of material into natural waters and sewers. • Follow appropriate federal, state and local regulations. • Small amounts can be incinerated. Careful! Combustion can create harmful gases such as carbon monoxide. • Large amounts must be passed to a licensed waste contractor. Precautions Precautions for Handling: Keep out of reach of children. Avoid inhalation of dust and contact with eyes. Keep away from excessive heat, sparks and open flames. Precautions for Storage: Keep out of reach of children. Keep container closed. Store at room temperature. Keep away from strong oxidizers. Other Precautions: None. Shipping Information Special Shipping Information: Non hazardous. UN Number: None. Hazards Class: None. User's Responsibility This bulletin cannot cover all possible situations which the user may experience when using this product. Each aspect of your operation must be examined in regard to if, or where, additional precautions may be necessary. All health and safety information contained in this bulletin must be provided to your employees or customers. It is your responsibility to use this information to develop appropriate work practice guidelines and employee instructional programs for your operation. Preparation Date of MSDS Date: March 1, 2007 Prepared by: Oki Data Americas, Inc. Engineering Services Department 2000 Bishops Gate Blvd. Mt. Laurel, NJ 08054-4620 Tel: (856) 235-2600 Fax: (856) 222-5320 www.okiprintingsolutions.com English Material Safety Data Sheet (MSDS) #58371201 for Type C7 Cyan Toner, P/N 42918903 All Countries / Regions For more information, contact Oki Data at: 2000 Bishops Gate Boulevard, Mount Laurel, NJ 08054-4620. Emergency Information: call 1-800-654-3282; US and Canada only. Emergency First Aid Procedures ___________ Toner swallowed (ingested) Never give anything by mouth to an unconscious person. If possible, rinse out mouth and give several glasses of water to drink. If symptoms persist, see medical attention. Toner inhaled. Remove person to fresh air. If necessary, seek medical attention. Toner gets in the eyes. Flush eyes with large quantities of cool water for 15 minutes, keeping the eyelids open with fingers. If necessary, seek medical attention. Toner gets on the skin. Wash toner off the skin with plenty of cool water and soap. If necessary, seek medical attention. Note: Small amounts of toner on skin or clothing can easily be removed with soap and cold water. Hot water makes toner harder to remove. Ingredients Styrene acrylate copolymer (80-95%) CAS#: Confidential. OSHA PEL: Not listed. ACGIH TLV: Not listed. LD50: Not Available. LC50: Not Available. Wax (5-15%) CAS#: Confidential. OSHA PEL: Not listed. ACGIH TLV: Not listed. LD50: Not Available. LC50: Not Available. Pigment (3-10%) CAS#: Confidential. OSHA PEL: Not listed. ACGIH TLV: Not listed. LD50: Not Available. LC50: Not Available. Silica (1-3%) CAS#: Confidential. OSHA PEL: Not listed. ACGIH TLV: 10 mg/m3. LD50: Not Available. LC50: Not Available. Physical Data Physical State: Solid. Melting/Freezing Point: Not available. Boiling Point: Not available. pH: Not available. 9 - English