Oki ML591 Product Update - Page 6
Menu Settings Table
View all Oki ML591 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
General Information (continued) Menu Settings Table Microline 300 Series Printers ONLY The settings listed below are the changes or additions to those listed in the User's Guide. For a complete explanation of the menu and each menu item, refer to the User's Guide, "Using Your Printer, Menu Mode, Explanations of Menu Items." The User's Guide is provided as an Adobe Acrobat file on the CD provided with your printer. The table below shows the items that may appear in the menu. Settings which are engaged at the factory (defaults) are set in bold italic. Some groups or entries will only appear when a specific emulation is engaged, as noted. Menu_Settings_Table.doc Group Symbol Sets (ML390/391 Series printers only) Top Feed Set-Up Serial I/F CSF Bin 1 CSF Bin 2 Item Code Page Settings (Defaults are set in bold italic) USA, Canada French, Multilingual, Portugal, Norway, BRASCII, Abicomp, Multilingual 858, ISO 8858-15 Form Tear-off Form Tear-off only appears when an optional Roll Paper Stand is installed. OFF, 500 ms, 1 sec, 2 sec CSF Bin Select CSF Bin Select only appears when an optional Dual Bin Cut Sheet Feeder is installed. Bin 1, Bin 2 CSF Type CSF Type only appears when an optional Cut Sheet Feeder is installed. Wide, Narrow ESC SI Pitch 17.1 CPI, 20 CPI Serial I/F only appears when an optional Serial Interface board is installed. Parity None, Odd, Even Serial Data 7/8 Bits 8 Bits, 7 Bits Protocol Ready|Busy, X-ON/X-OFF Diagnostic Test No, Yes BusyLine SSD -, SSD +, DTR, R TS Baud Rate 9600, 4800, 2400, 1200, 600, 300, 38400, or 19200 BPS 38400 BPS is displayed only when an optional serial interface board with 38400 firmware is installed. DSR Signal Valid, Invalid DTR Signal Ready on Power Up, Ready on Select Busy Time 200 ms, 1 sec CSF Bin 1 only appears when an optional Cut Sheet Feeder is installed. Line Spacing 6 LPI, 8 LPI Bottom Margin Valid, Invalid Page Width 13.6", 8" The setting for Page Width affects both Bin 1 and Bin 2. On a wide-carriage printer (321, 391), when Page Width is set to 8", the printer prints 8" wide lines, not the full width of the printer. Page Length 11", 11 2/3", 12", 14", 17", 3.5", 4", 5.5", 6", 7", 8", 8.5" CSF Bin 2 only appears when an optional Dual Bin Cut Sheet Feeder is installed. Line Spacing 6 LPI, 8 LPI Bottom Margin Valid, Invalid Page Length 11", 11 2/3", 12", 14", 17", 3.5", 4", 5.5", 6", 7", 8", 8.5" Page 6 of 20 P/N 58356302