Olympus FE 170 FE-170 Advanced Manual (English) - Page 57
Select [POWER OFF] and press, Select [MEMORY FORMAT] - problem
UPC - 050332158689
View all Olympus FE 170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Monitor indication CARD SETUP POWER OFF FORMAT SET OK Possible cause This card cannot be used in this camera. Or, the card is not formatted. MEMORY SETUP There is an error in the internal memory. POWER OFF MEMORY FORMAT SET OK NO CONNECTION NO PAPER The camera is not connected to the printer correctly. There is no paper in the printer. NO INK The printer has run out of ink. The paper is jammed. Corrective action Format the card or replace. • Select [POWER OFF] and press i and then insert a new card. • Select [FORMAT] [YES] and press i. The card is formatted. All data on the card is erased during formatting. Select [MEMORY FORMAT] [YES] and press i. The internal memory is formatted. All data in the internal memory is erased. Connect the camera and printer correctly. Load some paper in the printer. Replace the ink cartridge in the printer. Remove the jammed paper. JAMMED SETTINGS CHANGED PRINT ERROR r CANNOT PRINT The printer's paper tray has been removed or the printer has been operated while changing settings on the camera. Do not operate the printer while changing settings on the camera. There is a problem with Turn off the camera and printer. Check the printer and/or camera. the printer and remedy any problems before turning the power on again. Pictures recorded on Use a computer to print the pictures. other cameras may not be printed on this camera. Getting to know your camera better EN 57