Olympus FE20 FE-360 Instruction Manual (English) - Page 46

Using your charger abroad • The charger can be used in most home electrical sources within the range of 100 V to 240 V AC (50/60Hz) around the world. However, depending on the country or area you are in, the AC wall outlet may be shaped differently and the charger may require a plug adapter to match the wall outlet. For details, ask at your local electrical shop or travel agent. • Do not use travel voltage converters as they could damage your charger. Checking the image saving location The memory indicator shows whether the internal memory or card is being used during shooting and playback. Current memory indicator : Internal memory is being used None: Card is being used P Current memory indicator Using an xD-Picture Card A card (and internal memory) also corresponds to the film that records images in a film camera. Otherwise, the recorded images (data) can be erased, and retouching is also available with the use of a computer. Cards can be removed from the camera and exchanged, but this is not possible with the internal memory. Use of larger capacity cards enables you to take more pictures. Index area (Notes can be filled in here) Contact area (Contact section of the card with the internal camera terminal) 8M NORM Shooting mode IN 4 2008.10.26 12:30 NORM 8M 100-0004 IN 4 Playback mode Even if [MEMORY FORMAT]/[FORMAT], [ERASE], [SEL. IMAGE], or [ALL ERASE] is performed, the data in the card is not completely erased. When disposing of the card, damage the card to prevent the disclosure of personal data. Readout/recording process of the card Never open the battery/card compartment cover while the camera is reading or writing data, which is indicated by blinking of the card access lamp. This can not only damage the image data but also render the internal memory or card unusable. Do not touch the contact area directly. Cards compatible with this camera xD-Picture Card (16MB to 2GB) (TypeH/M/ M+, Standard) Using a new card Before using a non-Olympus card or a card that was used for another purpose in a computer or other device, use [MEMORY FORMAT]/[FORMAT] (p. 31) to format the card. Card access lamp 46 EN