Olympus PT-E06 PT-E06 Underwater Housing for the E-620 DSLR Instruction Manual - Page 18
Check the loading status
UPC - 050332168954
View all Olympus PT-E06 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
CAUTION: • Before loading the digital camera, attach the zoom and focus gears to the Case's zoom and focus rings. Refer to the instruction manual provided with the optional underwater lens port for details. • If the zoom and focus gears on the lens are not properly meshed with the Case's zoom dial gear, zooming and focusing are not possible. Even when the gears are meshed, the zoom and focus control ranges may be limited due to the positioning of the zoom and focus gears in the Case. Be sure to carefully follow the instructions provided with optional underwater lens port to ensure that correctly position the gears. 4 Insert the silica gel Before sealing the Case, be sure to insert the silica gel bag in the space between the bottom of the camera table and the inner surface of the Case. This will prevent fogging. Inset the silica gel bag laterally with the sides folded down. Pay attention to the orientation. CAUTION: • If the bag is only inserted part of the way, it will get caught by the O-ring when you try to seal the Case and water will leak into the Case. • Once silica gel has been used, the moisture absorption performance will be impaired. Always change the silica gel when you open or close the Case. En Check the loading status Always perform the following checks before sealing the Case. • Is the eyecup removed correctly? • Does maintenance of the O-ring perform properly? • Does the zoom dial operate properly? • Is the silica gel inserted all the way at the specified position? • Are the O-rings and the O-ring contact surfaces free of dirt and other foreign matter? • Are the O-rings installed properly? • When using an external electronic flash with a TTL cable, check that the hot shoe cable is connected properly and that the camera's automatic pop-up setting is set to OFF. • When using the UFL-2 underwater electronic flash with the underwater optical fiber cable, or when using a slave flash from a non-Olympus manufacture, check that the camera's built-in flash is popped up. EN 17