Onkyo A-9110 Owners Manual - Multiple Languages - Page 14
Speaker impedance settings
View all Onkyo A-9110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Speaker impedance settings 1 Preparations / // SETUP Depending on the speakers you connect, you may need to 2 change the speaker impedance setting on this unit. Refer to the page describing speaker connection (p9) and do the following procedures if the change is required. 1. Press SETUP on the remote controller. 2. Press D/C on the remote controller several times so that input source indicators on the unit, such as "LINE 1" and "LINE 2", start blinking. (BLINKING) 0 The indicators blink and the current setting is displayed. 3. Press B/A on the remote controller to change the setting. 3 - 4 ≠: "LINE 1" and "LINE 2" indicators are blinking - 8 ≠ (default value): "LINE 1", "LINE 2", "LINE 3" and "LINE 4" indicators are blinking 4. To exit the settings, press SETUP. 0 The setting mode ends after 5 seconds elapse with no operations performed. 4Ω 8Ω 14