Onkyo A-9110 Owners Manual - Multiple Languages - Page 16
Subwoofer output settings
View all Onkyo A-9110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Subwoofer output settings 1 2 3 AUTO ON OFF 16 Basic Operations / // SETUP This unit enables you to choose the subwoofer output mode, with the choices being "Auto" (default setting), "On", and "Off". Auto On Off : The subwoofer signal is not output when the DIRECT function (p11) is on. : The subwoofer signal is always output. : The subwoofer signal output is stopped, and the effect on sound quality can be moderated within the unit. It is recommended to set this off if you are not using a subwoofer. 0 There is no audio output from the subwoofer when headphones are connected, irrespective of the setting. 1. Press SETUP on the remote controller. 2. Press D/C on the remote controller several times so that some input source indicators, such as "LINE 1" and "LINE 2", light on the unit. (LIGHTING) 0 The indicators light and the current setting is displayed. 3. Press B/A on the remote controller to change the setting. - Auto (default value): "LINE 1" and "LINE 2" indicators light - On: "LINE 1", "LINE 2" and, "LINE 3" indicators light - Off: "LINE 1", "LINE 2", "LINE 3", and "LINE 4" indicators light 4. To exit the settings, press SETUP. 0 The setting mode ends after 5 seconds elapse with no operations performed.