Onkyo HT-R340 Owner Manual - Page 48

)54@&OCPPL 1BHF  8FEOFTEBZ 'FCSVBSZ 1. Adjusting the Listening Modes ENTER RETURN ON/STANDBY REMOTE MODE RECEIVER DVD TAPE INPUT SELECTOR 1 2 3 C D V1 V2 V3 4 5 6 MD MULTI CH DVD 7 8 9 CDR TAPE TUNER C D +10 0 CLR HDD --/--- DIMMER SLEEP CH DISC ALBUM VOL TOP MENU MENU SP A / B PLAYLIST ENTER MUTING PLAYLIST RETURN SETUP 2 RECEIVER ENTER 3 SETUP Use the Up and Down [ ]/[ ] buttons to select "4. Audio Adjust," and then press the [ENTER] button. Use the Left and Right [ ]/[ ] buttons to change the settings. Press the Down [ ] button to select the next setting. LISTENING MODE STEREO SURROUND AUDIO SUBTITLE RANDOM REPEAT TEST TONE CH SEL LEVEL- LEVEL+ PLAY MODE DISPLAY OR-EQ L NIGHT CINE FLTR RC-646S CINE FLTR L NIGHT 4 5 SETUP Repeat step 3 to complete all settings. Press the [SETUP] button. Setup closes. When you want to go back up one menu level to "Audio Adjust," press the [RETURN] button. Using the Audio Adjust Functions Some functions are not available with all speaker configurations. Audio Adjust provides various functions for adjusting the sound. 1 RECEIVER Press the [RECEIVER] button followed by the [SETUP] button. SETUP The Audio Adjust functions are explained below. Input Channel Settings ■ Multiplex This setting determines which channel is output from a stereo multiplex source. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on. Main: The main channel is output (default). Sub: The sub channel is output. M/S: Both the main and sub channels are output. ■ Mono (2ch) This setting determines which channel is output when the Mono listening mode is used with a stereo source. L+R: Both the left and right channels are output (default). L: Only the left channel is output. R: Only the right channel is output. 48