Onkyo HT-R340 Owner Manual - Page 53

)54@&OCPPL 1BHF  8FEOFTEBZ 'FCSVBSZ 1. Advanced Setup-Continued Crossover Frequency This setting only applies to the speakers that you specified as Small in the "Speaker Configuration" on page 52. To get the best bass performance from your speaker system, you need to set the crossover frequency according to the size and frequency response of your speakers. 7 Use the Down [ ] button to select "Crossover," and then use the Left and Right [ ]/[ ] but- tons to select a crossover fre- quency. Use the diameter of the smallest speaker in your system when choosing the crossover frequency. Speaker cone diameter Crossover frequency Over 8 in. (20 cm) 40/50/60Hz* 6-1/2 to 8 in. (16-20 cm) 80Hz 5-1/4 to 6-1/2 in. (13-16 cm) 100Hz (default) 3-1/2 to 5-1/4 in. (9-13 cm) 120Hz Under 3-1/2 in. (9 cm) 150/200Hz* *Choose the setting suitable for the speaker. Continue with step 8 of the "Double Bass" setting below. Notes: • For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly. • Choose a higher crossover frequency if you want more sound from your subwoofer. 8 9 SETUP Use the Down [ ] button to select "Double Bass," and then use the Left and Right [ ]/[ ] buttons to select: On: Double Bass function on. Bass from the front left and right channels is also fed to the subwoofer (default). Off: Double Bass function off. Press the [SETUP] button. Setup closes. When you want to go back up one menu level to "SP Config," press the [RETURN] button. Double Bass With the Double Bass function, you can boost bass output by feeding bass sounds from the front left and right channels to the subwoofer. This function can be set only if the Subwoofer setting (step 3) is set to Yes, and the Front setting (step 4) is set to Large in the Speaker Configuration on page 52. 53