Onkyo HT-R340 Owner Manual - Page 58

Specifications - watts

Page 58 highlights

)54@&OCPPL 1BHF  8FEOFTEBZ 'FCSVBSZ 1. Specifications Amplifier Section Rated Output Power North American (FTC): (FL, FR, C, SL, SR) 95 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7% (Subwoofer) 105 watts minimum continuous power per channel, 8 ohm loads, 1 channel driven at 80 kHz, with a maximum total harmonic distortion of 0.7% (FL, FR, C, SL, SR) 105 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7% (Subwoofer) 125 watts minimum continuous power per channel, 6 ohm loads, 1 channel driven at 80 kHz, with a maximum total European (IEC): harmonic distortion of 0.7% 6 ch × 110 W at 6 ohms, 1 kHz, 1ch driven Maximum Output Power Asian (JEITA): 6 ch × 120 W at 6 ohms, 1 kHz, 1ch driven Dynamic Power THD (Total Harmonic Distortion) Damping Factor Input Sensitivity and Impedance Output Level and Impedance Frequency Response Tone Control Signal to Noise Ratio Speaker Impedance 180 W + 180 W (3Ω, Front) 140 W + 140 W (4Ω, Front) 95 W + 95 W (8Ω, Front) 0.9% (Power Rated) 60 (Front, 1kHz, 8Ω) 200 mV/ 47 kΩ (LINE) 200 mV/ 470 Ω (REC OUT) 10 Hz-50 kHz/ +1 dB-3 dB (Direct mode) ±10 dB, 80 Hz (BASS) ±10 dB, 20 kHz (TREBLE) 100 dB (LINE, IHF-A) 6Ω- 16Ω Video Section Input Sensitivity/Output Level and Impedance 1 Vp-p /75Ω (Component) 0.7 Vp-p /75Ω (Component PB/CB, PR/CR) 1 Vp-p /75Ω (Composite) Component Video Frequency Response 5 Hz-50 MHz Tuner Section ■ FM Tuning Frequency Range Usable Sensitivity Signal to Noise Ratio THD Frequency Response Stereo Separation North American: 87.5 MHz-107.9 MHz European: 87.50 MHz-108.00 MHz Asian: 87.50 MHz-108.00 MHz Stereo: 22.2 dBf (75Ω IHF) Mono: 15.2 dBf (75Ω IHF) Stereo: 67 dB (IHF-A) Mono: 73 dB (IHF-A) Stereo: 0.5% (1 kHz) Mono: 0.3% (1 kHz) 30 Hz-15 kHz / ±1 dB 40 dB (1kHz) ■ AM Tuning Frequency Range 58 Usable Sensitivity Signal to Noise Ratio THD North American: 530 kHz-1710 kHz European: 522 kHz-1611 kHz Asian: 522 kHz-1611 kHz at 9 kHz steps 530 kHz-1710 kHz at 10 kHz steps 300 µV 40 dB 0.7% General Power Supply Power Consumption Stand-by Power Consumption Dimensions (W × H × D) Weight North American: AC 120 V, 60 Hz Australian and European: AC 230-240 V, 50 Hz Others: AC 120/220-240 V, 50/60 Hz AC 220-230 V, 50/60 Hz North American: 3.4 A Australian and European: 360 W Korean: 330 W Worldwide: 300 W North American: 0.1 W European: 0.3 W Others: 0.5 W 435 × 150 × 369 mm 17-1/8" × 5-7/8" × 14-1/2" North American: 8.8 kg 19.4 lbs. Others: 9.6 kg, 21.2 lbs. ■ Video Inputs Component DVD, VIDEO1, VIDEO2 Composite DVD, VIDEO1, VIDEO2, VIDEO3 ■ Video Outputs Component MONITOR Composite MONITOR, VIDEO1 ■ Audio Inputs Digital Inputs Analog Inputs Multichannel Inputs Optical: 2 Coaxial: 1 DVD (MULTICHANNEL),VIDEO1, VIDEO2,VIDEO3,TAPE,CD 6 ■ Audio Outputs Analog Outputs TAPE,VIDEO1 Subwoofer Pre Outputs 1 Speaker Outputs SP-A (FL, FR, C, SL, SR, SW) + SP-B (L, R) Phones 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

58
Specifications
Amplifier Section
Video Section
Tuner Section
FM
AM
General
Video Inputs
Video Outputs
Audio Inputs
Audio Outputs
Rated Output Power
North American (FTC):
(FL, FR, C, SL, SR)95 watts minimum continuous power
per channel, 8 ohm loads, 2 channels
driven at 1 kHz, with a maximum total
harmonic distortion of 0.7%
(Subwoofer)
105 watts minimum continuous power
per channel, 8 ohm loads, 1 channel
driven at 80 kHz, with a maximum total
harmonic distortion of 0.7%
(FL, FR, C, SL, SR)105 watts minimum continuous power
per channel, 6 ohm loads, 2 channels
driven at 1 kHz, with a maximum total
harmonic distortion of 0.7%
(Subwoofer)
125 watts minimum continuous power
per channel, 6 ohm loads, 1 channel
driven at 80 kHz, with a maximum total
harmonic distortion of 0.7%
European (IEC):
6 ch
×
110 W at 6 ohms, 1 kHz, 1ch driven
Maximum Output Power
Asian (JEITA):
6 ch
×
120 W at 6 ohms, 1 kHz, 1ch driven
Dynamic Power
180 W + 180 W (3
, Front)
140 W + 140 W (4
, Front)
95 W + 95 W (8
, Front)
THD (Total Harmonic
Distortion)
0.9% (Power Rated)
Damping Factor
60 (Front, 1kHz, 8
)
Input Sensitivity and
Impedance
200 mV/ 47 k
(LINE)
Output Level and
Impedance
200 mV/ 470
(REC OUT)
Frequency Response
10 Hz–50 kHz/ +1 dB-3 dB (Direct mode)
Tone Control
±10 dB, 80 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio
100 dB (LINE, IHF-A)
Speaker Impedance
6
– 16
Input Sensitivity/Output
Level and Impedance
1 Vp-p /75
(Component)
0.7 Vp-p /75
(Component P
B
/C
B
, P
R
/C
R
)
1 Vp-p /75
(Composite)
Component Video
Frequency Response
5 Hz–50 MHz
Tuning Frequency
Range
North American: 87.5 MHz–107.9 MHz
European: 87.50 MHz–108.00 MHz
Asian: 87.50 MHz–108.00 MHz
Usable Sensitivity
Stereo: 22.2 dBf (75
IHF)
Mono: 15.2 dBf (75
IHF)
Signal to Noise Ratio
Stereo: 67 dB (IHF-A)
Mono: 73 dB (IHF-A)
THD
Stereo: 0.5% (1 kHz)
Mono: 0.3% (1 kHz)
Frequency Response
30 Hz–15 kHz / ±1 dB
Stereo Separation
40 dB (1kHz)
Tuning Frequency
Range
North American: 530 kHz–1710 kHz
European: 522 kHz–1611 kHz
Asian:
522 kHz–1611 kHz at 9 kHz steps
530 kHz–1710 kHz at 10 kHz steps
Usable Sensitivity
300 μV
Signal to Noise Ratio
40 dB
THD
0.7%
Power Supply
North American: AC 120 V, 60 Hz
Australian and European:
AC 230-240 V, 50 Hz
Others:
AC 120/220–240 V, 50/60 Hz
AC 220–230 V, 50/60 Hz
Power Consumption
North American: 3.4 A
Australian and European: 360 W
Korean: 330 W
Worldwide: 300 W
Stand-by Power
Consumption
North American: 0.1 W
European: 0.3 W
Others: 0.5 W
Dimensions
(W
×
H
×
D)
435
×
150
×
369 mm
17-1/8"
×
5-7/8"
×
14-1/2"
Weight
North American:
8.8 kg
19.4 lbs.
Others: 9.6 kg, 21.2 lbs.
Component
DVD, VIDEO1, VIDEO2
Composite
DVD, VIDEO1, VIDEO2, VIDEO3
Component
MONITOR
Composite
MONITOR, VIDEO1
Digital Inputs
Optical: 2
Coaxial: 1
Analog Inputs
DVD (MULTICHANNEL),VIDEO1,
VIDEO2,VIDEO3,TAPE,CD
Multichannel Inputs
6
Analog Outputs
TAPE,VIDEO1
Subwoofer Pre Outputs
1
Speaker Outputs
SP-A (FL, FR, C, SL, SR, SW) +
SP-B (L, R)
Phones
1
HT-S590_En.book Page 58 Wednesday, February 1, 2006 4:26 PM