Onkyo HT-S9800THX Basic/Advanced Manual - English - Page 27
General Specifications, > Advanced Setup, > Listening Modes, > Network Functions
View all Onkyo HT-S9800THX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. General Specifications ˙ Amplifier Section Rated Output Power (FTC) (North American) With 8 ohm loads, both channels driven, from 2020,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. Surround Mode Output Power (*) (6 ohms, 1 kHz THD 0.9%) 170 W per channel * Reference output for each speakers. Depending on the source and the listening mode settings, there may be no sound output. Rated Output Power (IEC) (European) 7 ch × 165 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD Maximum Effective Output Power (JEITA) (North American) 7 ch × 210 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD Dynamic Power (*) * IEC60268-Short-term maximum output power 240 W (3 Ω, Front) 210 W (4 Ω, Front) 120 W (8 Ω, Front) THD+N (Total Harmonic Distortion+Noise) 0.08% (20 Hz - 20,000 Hz, half power) Input Sensitivity and Impedance (1 kHz 100 W/8 Ω) 200 mV/47 kΩ (LINE (Unbalance)) 3.5 mV/47 kΩ (PHONO MM) Rated RCA Output Level and Impedance 1 V/470 Ω (SUBWOOFER PRE OUT) 200 mV/2.3 kΩ (ZONE LINE OUT) Phono Overload 70 mV (MM 1 kHz 0.5%) Frequency Response 10 Hz - 100 kHz/+1 dB, -3 dB (Direct/Pure Audio) Tone Control Characteristics 2 ±10 dB, 90 Hz (BASS) ±10 dB, 7.5 kHz (TREBLE) Signal to Noise Ratio 106 dB (IHF-A, LINE IN, SP OUT) 80 dB (IHF-A, PHONO IN, SP OUT) Speaker Impedance 4 Ω - 16 Ω Headphone Output Impedance 330 Ω Headphone Rated Output 80 mW (32 Ω, 1 kHz, 10% THD) ˙ Video Section Signal level 1 Vp-p/75 Ω (Composite Video) 1 Vp-p/75 Ω (Component Video Y) 0.7 Vp-p/75 Ω (Component Video B/R) Maximum resolution supported by component video 480i/576i ˙ Tuner Section FM Tuning Frequency Range 87.5 MHz - 107.9 MHz (North American) 87.5 MHz - 108.0 MHz, RDS (Others) AM Tuning Frequency Range 530 kHz - 1710 kHz (North American) 522/530 kHz - 1611/1710 kHz (Others) Preset Channel 40 ˙ Network Section Ethernet LAN 10BASE-T/100BASE-TX Wireless LAN IEEE 802.11 a/b/g/n standard (Wi-FiR standard) 5 GHz/2.4 GHz band ˙ BLUETOOTH Section Communication system BLUETOOTH Specification version 4.1+LE Frequency band 2.4 GHz band Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles A2DP 1.2 AVRCP 1.3 HOGP-Host (Client) HOGP-HID Device (Server) HID Service (HIDS) Supported Codecs SBC AAC Transmission range (A2DP) 20 Hz - 20 kHz (Sampling frequency 44.1 kHz) Maximum communication range Line of sight approx. 15 m (*) ½½ The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc. ˙ General Power Supply AC 120 V, 60 Hz (North American) AC 220 - 240 V, 50/60 Hz (Others) Power Consumption 580 W (North American) 570 W (Others) 0.15 W (Stand-by) 60 W (No-sound) 5.7 W (HDMI Standby Through) 2.6 W (Network Standby) Dimensions (W × H × D) 435 mm × 173.5 mm × 378 mm 17-1/8" × 6-13/16" × 14-7/8" Weight 10.0 kg (22.0 lbs.)