Onkyo HT-S9800THX Basic/Advanced Manual - English - Page 53
Advanced Speaker Connections, Connections for Different Height Speakers Types, Front High
View all Onkyo HT-S9800THX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Advanced Speaker Connections Connections for Different Height Speakers Types • No sound is played from the height speakers when playing audio from ZONE SPEAKER. 1. Connect the and speakers as shown below using the FRONT terminals and SURROUND BACK or HEIGHT terminals. The Basic Manual explains how to connect a 7.1 channel system using the included speakers. Different connection methods are introduced here. Audio output is set to match the included speaker configuration by default. Change the speaker configuration to suit the number of speakers connected and the method of connection. • If any of the connected speakers have an impedance of 4 Ω or more to less than 6 Ω, after completing Initial Setup, you need to make some settings in the Setup menu. Set "2. Speaker" - "Configuration" - "Speaker Impedance" to "4ohms". ˙ Front High Install the Front speakers and Front High speakers as shown in the figure to enjoy the Dolby Atmos listening mode. Install the Front High speakers on the upper part of the front wall. 2. Change the setting on the screen of "2. Speaker" "Configuration" in the Setup menu. 28