Onkyo R-N855 User Manual English - Page 33

Firmware Update The updating function on this unit This unit has functionality to update the firmware (the system software) over a network or by the USB port. This enables us to make improvements to a variety of operations and to add features. How to update There are two methods for updating the firmware: via network and via USB. The update may take about 5 minutes to complete for either method: via network or via USB. Furthermore, existing settings are guaranteed regardless of the method used for update. 0 For the latest information on updates, visit our company's website. There is no need to update the firmware on this unit if there is no update available. 0 When performed over the network, it may take even more time depending on the connection status. 0 During an update, do not - Disconnect and reconnect any cable or USB storage device, or perform any operation on the component such as turn off its power - Accessing this unit from a PC or smartphone using an application Disclaimer: The program and accompanying online documentation are furnished to you for use at your own risk. We will not be liable and you will have no remedy for damages for any claim of any kind whatsoever concerning your use of the program or the accompanying online documentation, regardless of legal theory, and whether arising in tort or contract. In no event will we be liable to you or any third party for any special, indirect, incidental, or consequential damages of any kind, including, but not limited to, compensation, reimbursement or damages on account of the loss of present or prospective profits, loss of data, or for any other reason whatsoever. Updating the Firmware via Network 0 Check that the unit is turned on, and the connection to the Internet is secured. 0 Turn off the controller component (PC etc.) connected to the network. 0 Stop any playing Internet radio, USB storage device, or server content. 1. Press MENU on the remote controller to display "Network" on the display. Network 2. Press / and ENTER to select "Update" - "via Network" in order. Update 0 "Update" is not displayed if there are no firmware updates. 3. Press ENTER to start the firmware update. 0 "Completed" is displayed when the update is complete. 4. Press Í to switch the unit to standby. The process is completed and your firmware is updated to the latest version. If an error message is displayed : When an error occurs Error!" is displayed on the display of this unit. Check the following: 0 ˎ -01, ˎ -10 : Ethernet cable not found. Connect the Ethernet cable properly. 0 ˎ-02, ˎ-03, ˎ-04, ˎ-05, ˎ-06, ˎ-11, ˎ-13, ˎ-14, ˎ -16, ˎ -17, ˎ -18, ˎ -20, ˎ -21 : Internet connection error. Check the following: - The router is turned on - This unit and the router are connected via the network Try to disconnect and then connect again the power to the unit and router. This may solve the problem. If you are still unable to connect to the Internet, the DNS server or proxy server may be temporarily down. Check the service status with your ISP provider. 0 Others : Disconnect then reconnect the power cord, then repeat from the beginning. Updating via USB 0 Prepare a 128 MB or larger USB storage device. FAT16 or FAT32 file system format. 0 Delete any data stored on the USB storage device. 0 Turn off the controller component (PC etc.) connected to the network. 0 Stop any playing Internet radio, USB storage device, or server content. 0 Some USB storage devices may take long to load, may not be loaded correctly, or may not be correctly fed depending on the device or their content. 0 We will not be liable whatsoever for any loss or damage of data, or storage failure arising from the use of the USB storage device with this unit. Thank you for your understanding. 1. Connect the USB storage device to your PC. 2. Download the firmware file from our company's website to your PC and unzip. Firmware files are named in the following way: ONKHIM zip Unzip the file on your PC. The number of unzipped files and folders varies depending on the model. 3. Copy all unzipped files and folders to the root folder of the USB storage device. 0 Make sure to copy the unzipped files. 4. Connect the USB storage device to the USB port of this unit. 0 If you connect a USB hard disk drive to the USB port of the unit, we recommend that you use its AC adapter to power it. 0 If the USB storage device has been partitioned, each section will be treated as an independent device. 5. Press MENU on the remote controller to display "Network" on the display. Network 6. Press / and ENTER to select "Update" - "via USB" in order. Update 0 "Update" is not displayed if there are no firmware En-33