Onkyo R-N855 User Manual English - Page 7

Rear Panel        90° 180°      1. AC INLET : Connect the supplied power cord. 2. USB port: Connect a USB storage device or HDD (hard disk drive) to play music files. You can also supply power (maximum 5 V/1 A) to USB devices with a USB cable. 3. DIGITAL IN OPTICAL terminal : Input digital audio signals from an external device, such as a TV or CD player, with a digital optical cable. 4. DIGITAL IN COAXIAL terminal : Input digital audio signals from an external device, such as a TV or CD player, with a digital coaxial cable. 5. ETHERNET port : Connect to the network with an Ethernet cable. 6. Wireless antenna : Used for Wi-Fi connection or when using a BLUETOOTH enabled device. Adjust their angles according to the connection status. 7. GND terminal : Connect if the turntable connected to the PHONO IN jack has a ground wire. 8. SPEAKER terminals : Connect speakers with speaker cables. 9. LINE OUT jacks : Connect a recording device such as a cassette tape deck with an analog audio cable. You can also connect a subwoofer with built-in amplifier with a subwoofer cable. ( P10, 32 "LINE OUT/SW") 10.PHONO IN jacks : Connect a turntable (MM cartridge). 11. LINE IN jacks : Input audio signals from an external device, such as a TV or CD player, with an analog audio cable. 12.ANTENNA DAB terminal : Connect the supplied DAB/ FM wire antenna. 13. REMOTE CONTROL jacks : Connect an Onkyo product with an RI jack using an RI cable to synchronize with this unit. ( P24) En-7