Onkyo TX-NR5100 7.2-Channel 8K AV Receiver Instruction Manual - English
Onkyo TX-NR5100 7.2-Channel 8K AV Receiver Manual
View all Onkyo TX-NR5100 7.2-Channel 8K AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Onkyo TX-NR5100 7.2-Channel 8K AV Receiver manual content summary:
- Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 1
Instruction Manual AV RECEIVER TX-NR5100 En - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 2
Table of contents Speaker Layout Main Room Zone B Speaker Connections Firmware Update Troubleshooting Supplementary Information Reducing the Power Consumption in Standby State When the following functions are enabled, the power consumption in standby state increases. To reduce the - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 3
Update Update Information of the firmware Firmware Update Procedure Part Names Front Panel Display Rear Panel Remote Controller Inputting Characters Speaker Layout The listening room and the speaker layout 3.1 Channel System 5.1 Channel System 7.1 Channel System 3.1.2 Channel System 5.1.2 Channel - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 4
this unit with an Amazon account 70 Supported Audio Formats 83 Operating this unit 71 Windows Media® Player 12 settings 83 Amazon Music 72 Playing Back 84 Registering This Unit with Amazon Music 72 Play Queue 86 Playing Amazon Music using the Onkyo Controller 73 Adding Play - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 5
2. Speaker 3. Audio Adjust 4. Source 5. Hardware 6. Miscellaneous Web Setup Menu operations Initial Setup with Auto Start-up Wizard Operations Onkyo Controller Main features Initial Setup Troubleshooting When the unit is operating erratically Troubleshooting 88 Appendix 88 88 Speaker Layouts and - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 6
can be used may no longer be available if new functions are added by updating firmware or the service providers terminate their services. Also, available services may differ depending on your area. • Details on the firmware update will be posted on our website and through other means at a later date - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 7
displays, however, operations and functions are the same. Update 1. Press . The Setup menu is displayed on the TV screen. 2. Select "6. Miscellaneous" - "Firmware Update" - "Update via NET" with the cursors in order, then press ENTER. • If "Firmware Update" is grayed out and cannot be selected, wait - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 8
the router. This may solve the problem. If you are still unable Updating via USB • While updating the firmware, do not do the following: - Disconnecting and reconnecting cables, USB storage device, speaker setup supported. - USB hubs and USB devices equipped with the hub function are not supported. - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 9
section will be treated as an independent device. 5. Press . The Setup menu is displayed on the TV screen. 6. Select "6. Miscellaneous" - "Firmware Update" - "Update via USB" with the cursors in order, then press ENTER. • If "Firmware Update" is grayed out and cannot be selected, wait for a while - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 10
Standby ( →p112) - Bluetooth Wakeup ( →p113) 4. Remote control sensor: Receives signals from the remote controller. • The reception range of the remote controller is TV screen while playing. ( →p64) 8. Display ( →p12) 9. SETUP button: You can display advanced setting items on the TV and the display - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 11
. Input selector buttons: Switches the input to be played. 16. TONE CONTROL button: Adjusts the sound quality. Press / of "TREBLE", "VOCAL" or "BASS" respectively. 17. SETUP MIC jack: Connect the supplied speaker - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 12
the listening mode. 4. Lights in the following conditions. TUNED: Receiving AM/FM radio. FM ST: Receiving FM stereo. 4 5 SLEEP: Sleep timer is set. AUTO the range provided by "6". 7 1. Speaker/Channel display: Displays the output channel that corresponds to the selected listening mode. 2. - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 13
video signals and audio signals with an HDMI cable connected to an AV component. 6. ETHERNET port: Connect to the network with an Ethernet 8. Power cord 1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 14
Rear Panel 9 JK L 9. AUDIO IN jacks: Input AV component audio signals with an analog audio cable. 10. ZONE B PRE/LINE OUT jacks OUT jack. 12. SPEAKERS terminals: Connect speakers with speaker cables. (FRONT L/R terminals support banana plugs. Use a plug 4 mm in diameter. Y plug connection is not - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 15
MODE" with "18. MODE button" allows you to operate an HDMI CEC function-enabled AV component. (Some devices may not be operated.) 4. Q (QUICK MENU) button: "5. Hardware" - "Power Management" - "Sleep Timer" ( →p112) on the Setup menu. 8. HDMI MAIN/SUB button: Select the HDMI OUT jack to output video - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 16
button: Used to register AM/FM radio stations. ( →p61) 18. MODE button: Switches between automatic tuning and manual tuning for AM/FM stations ( →p59). Also, when an HDMI CEC functionenabled AV component is connected to this unit, you can switch "3. Play buttons" between "CEC MODE" and "RCV MODE - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 17
Characters You can input characters or symbols on the keyboard displayed on the TV screen such as when inputting a password for Wi-Fi Setup ( →p107) or naming a preset radio station ( →p103). 1. Select a character or symbol with the cursors / / / on the remote controller and press the ENTER button - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 18
Speaker Layout Speaker Layout This unit can be used in different ways, depending on the layout of the speakers you are installing. Select the speaker layout that suits the installation environment, then confirm the methods for installation and connection. Speaker layout ( →p20) Speaker - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 19
The listening room and the speaker layout 1 Speaker Layout 1. ZONE A Speakers The speaker system set up in the main room (where this unit is located). 2. ZONE B Speakers The 2 ch speaker system set up in a separate room (ZONE B). The same source can be played back in the main room and the separate - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 20
Speaker Layout 3.1 Channel System This is a 3.1 Channel System that combines the front speakers with the center speaker and subwoofer. Basic system ( →p26) 3.1 ch + ZONE B ( →p26) 3.1 ch (Bi-Amping (Front)) ( →p26) Main Room Zone B 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 20 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 21
5.1 Channel System This is a basic 5.1 Channel System. Basic system ( →p26) 5.1 ch + ZONE B ( →p26) Main Room Speaker Layout 5.1 ch (Bi-Amping (Front)) ( →p26) Zone B 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 21 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 22
Speaker Layout 7.1 Channel System This is a 7.1 Channel System that consists of the basic 5.1 Channel System and added surround back speakers. Basic system ( →p27) 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 22 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 23
System A Speaker System that is a 3.1 Channel System with one set of height speakers added. Speaker Layout 3.1.2 ch (Front High or Rear High) ( →p28) 3.1.2 ch (Top Front or Top Middle or Top - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 24
System A Speaker System that is a 5.1 Channel System with one set of height speakers added. Speaker Layout 5.1.2 ch (Front High or Rear High) ( →p29) 5.1.2 ch (Top Front or Top Middle or Top - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 25
Speaker Installation Speaker Installation How the speakers are set up depends on the size and shape of the room, so here we introduce just a basic layout example. The alphabetic symbols used in this chapter represent the following speakers: FL FR C SW SL SR SBL SBR FHL FHR RHL RHR TFL TFR TML TMR - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 26
System FL SW C FR a Speaker Installation 5.1 Channel System FL SW C a b SL FR SR FL, FR C SW a: 22° to 30° Place the Left and Right Front Speakers to match ear height. The center - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 27
7.1 Channel System FL SW C a b SL c FR SR SBL SBR a: 22° to 30°, b: 90° to 110°, c: 135° to 150° FL, FR Place the Left and Right Front - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 28
3.1.2 Channel System High Speakers 3´ (0.9 m) or more FHL FHR a a: 22° to 30° RHL RHR 3´ (0.9 m) or more FHL, FHR Place the front high speakers directly above the front - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 29
5.1.2 Channel System High Speakers 3´ (0.9 m) or more FHL FHR a b RHL RHR a: 22° to 30° b: 120° 3´ (0.9 m) or more FHL, FHR Place the front high speakers directly above the - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 30
Speaker Connections (Before starting the procedure) Speakers you can use with this unit and cable connections 31 4-16Ω 3.1 Channel System 5.1 Channel System 7.1 Channel System 3.1.2 Channel System 5.1.2 Channel System 33, 34, 35 36, 37, 38 39 40, 41, 42 43 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 30 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 31
the Setup menu, press on the remote controller, and set "2. Speaker" - "Configuration" - "Speaker Impedance" ( →p96) to "4ohms". Connect the Speaker Cables 1/2˝ (12 mm) Make correct connection between the unit's jacks and speaker's jacks (+ side to + side, and - side to - side) for each channel - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 32
Connect the Subwoofer a a Subwoofer cable Connect a powered subwoofer with this unit using a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack. Speaker Connections 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 32 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 33
3.1 Channel System FL SW C FR Speaker Connections SW FR FL C 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 33 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 34
3.1 Channel System + ZONE B SPEAKER MAIN ROOM FL SW C FR Speaker Connections ZONE B FL(ZB) FR(ZB) SW FR FL C FR(ZB) FL(ZB) 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 34 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 35
3.1 Channel System (Bi-Amping the Speakers) FL SW C FR Speaker Connections For highfrequency For low- SW FR frequency FL C Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of your - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 36
5.1 Channel System FL SW C FR SL SR Speaker Connections SW FR FL C SR SL 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 36 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 37
5.1 Channel System + ZONE B SPEAKER MAIN ROOM FL SW C FR SL SR Speaker Connections ZONE B FL(ZB) FR(ZB) SW FR FL C SR SL FR(ZB) FL(ZB) 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 37 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 38
Channel System (Bi-Amping the Speakers) FL SW C FR SL SR Speaker Connections For highfrequency For low- SW FR frequency FL C SR SL Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 39
7.1 Channel System FL SW C FR SL SR SBL SBR Speaker Connections SW FR FL C SR SL SBR SBL 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 39 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 40
3.1.2 Channel System HL HR FL SW C FR Speaker Connections SW FR FL C OR OR OR OR HR HL *1 *1 Connect the Height Speakers you have actually installed (HL/HR: Height Speakers, Top Speakers, Dolby Enabled Speakers). 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 40 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 41
3.1.2 Channel System + ZONE B SPEAKER MAIN ROOM HL HR FL SW C FR Speaker Connections ZONE B FL(ZB) FR(ZB) SW FR FL C OR OR FR(ZB) FL( - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 42
1ch HR HL *1 Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of your speakers as well. *1 Connect the Height Speakers you have actually installed (HL/HR: Height Speakers, Top Speakers, Dolby - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 43
5.1.2 Channel System HL HR FL SW C FR SL SR Speaker Connections SW FR FL C SR SL OR OR OR OR HR HL *1 *1 Connect the Height Speakers you have actually installed (HL/HR: Height Speakers, Top Speakers, Dolby Enabled Speakers). 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 43 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 44
Notes regarding connections with HDMI cables 45 Connecting the TV 46 Connecting the SUB Monitor 47 Connecting Playback Devices 48 Connecting an AV Component in a Separate Room (ZONE B connection) 50 Connecting Antennas 51 Network Connection 52 Connecting the Power Cord 53 44 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 45
High Speed HDMI Cable or Premium High Speed HDMI Cable with Ethernet that have the "PREMIUM Certified Cable" label attached to the packaging. • When 8K high-quality video (8K 60Hz, etc.) is to be played, use ULTRA High Speed HDMI Cable that has the "ULTRA HIGH SPEED" label attached to the packaging - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 46
plays the audio of the TV on this unit. To check if the TV supports the ARC function and eARC function, refer to the instruction manual of the TV, etc. ARC/eARC compatible audio formats ( →p153) • Settings are required when 4K or 8K high-quality video is to be played. Refer to "HDMI 4K - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 47
Connecting the SUB Monitor Connections SUB Monitor This unit has multiple HDMI OUT jacks, and another TV or projector can be connected to the HDMI OUT SUB jack. • Switch between MAIN and SUB using the HDMI MAIN/SUB button on the remote controller ( →p15) or "Quick Menu" ( →p64). Note that this jack - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 48
signals of the AV component to the TV even if this unit is in standby mode. • Settings are required when 4K or 8K high-quality video is to be played. Refer to "HDMI 4K/8K Signal Format" ( →p93) for information on the settings. Also, use an HDMI cable that supports 4K or 8K video. • The - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 49
Connecting an Audio Component Connections This is an example of connection with an audio component. Connect a CD player using a digital coaxial cable or analog audio cable. a b OR CD a Analog audio cable, b Digital coaxial cable 49 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 50
Connections Connecting an AV Component in a Separate Room (ZONE B connection) Connecting an "Zone B Output Level" to "Variable" for "Speaker Setup" in the Initial Setup section ( →p117). When setting "Zone B Output Level" from the Setup menu, press on the remote controller, and set "2. Speaker - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 51
Connecting Antennas AM a Connections Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals. Attach the indoor FM antenna to the wall using push pins or adhesive tape. a b A B FM b a AM loop antenna, b Indoor FM antenna 51 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 52
-Fi, select your desired setting method in "Network Connection" ( →p118) of Initial Setup, and then follow the on-screen instructions. To configure the setting on the Setup menu after the completion of Initial Setup, press the button on the remote controller, and select "5. Hardware" - "Network" to - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 53
Connecting the Power Cord Connections Connect the power cord after all the connections are completed. a a Power cord 53 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 54
55 BLUETOOTH® Playback 56 Listening To the Radio 59 Listening Mode 62 Quick Menu 64 Network Service Spotify 66 AirPlay® 67 DTS Play-Fi® 69 Amazon Alexa 70 Amazon Music 72 Connecting the Sonos System for Playback 75 Internet Radio 77 Convenience functions Playing different - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 55
Playback Playing audio from an externally connected device You can play the audio from AV components, such as Blu-ray disc players through this unit. • When a TV is or player is connected to this unit using HDMI connection. 3. Start play on the AV component. TV HDMI MAIN/SUB Input selector 55 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 56
you press the BLUETOOTH button, "Now Pairing..." appears on the display, and the pairing mode is enabled. The illustration shows an image. Onkyo TX-NR5100 XXX 2. Enable (turn on) the BLUETOOTH function of the BLUETOOTH enabled device, and then select this unit from among the devices displayed. If - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 57
Latency Mode Pairing Information Device Status On (Tx) Start Variable Off Off Clear Ready BLUETOOTH wireless technology enabled devices that are able to receive, then a list of relevant devices is displayed. enabled device, you may need to pair manually. If the device name does not appear in - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 58
AV " is "On (Tx)" or "On (Main + Tx)" and in the receiving device). • Audio cannot be output from a BLUETOOTH wireless technology enabled device in the following cases: - When the audio file is DSD format - When playing audio from one of the following network services: Chromecast built-in, Amazon - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 59
Listening To the Radio You can receive AM/FM radio stations on this unit with the built up. When FM broadcasts reception is poor: Perform the procedure for "Tuning Manually" ( →p60). Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 60
of the sensitivity of the reception. 1. Press TUNER repeatedly to select either "AM" or "FM". 2. Press MODE repeatedly to display "TunMode: Manual" on the display. 3. While pressing the cursors / , select the desired radio station. • Each time you press the cursors / , the frequency changes - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 61
Presetting a Radio Station Registration Procedure You can preset up to 40 of your favorite radio stations. After tuning in to the radio station you want to register, perform the following procedure. 1. Press MEMORY so that the preset number on the display blinks. 2. While the preset number is - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 62
Playback Listening Mode This unit is equipped with a variety of listening modes, and you can select the optimum listening mode for movies, TV, music, and games by pressing MOVIE/TV, MUSIC, and GAME. ( →p139) • For details of the effects of each listening mode, refer to "Listening Mode Effects" ( → - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 63
Checking the input format and listening mode Repeatedly pressing the button on the remote controller switches the display of the main unit in the following order. • The content displayed depends on the source, BLUETOOTH, etc., being played. • Not all the information is necessarily displayed. Input - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 64
screen during playback. Press Q on the remote controller to display the Quick Menu. Quick Menu HDMI Audio RoomEQ Level HDMI Out A/V Sync Audio Return Channel BD/DVD Select the item with the cursors / of the remote controller, and press the ENTER button to confirm your selection. Use the cursors - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 65
according to the room acoustics acquired with the AccuEQ calibration is applied to all channels. On (ex. L/R): The same EQ as "On (All Ch)" is to each input selector. Manual Equalizer: Select "Preset 1" to "Preset 3" configured in "2. Speaker" - "Equalizer Settings" on the Setup menu. When this is - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 66
Spotify Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. Playback 66 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 67
iOS devices wirelessly. • Update the OS version on your refer to the operating instructions for the iOS device app on an iOS device that supports AirPlay and select this unit from the to "Off" in the Setup menu, turn this unit on manually, and press the NET Onkyo TX-NR5100 XXXXXX e.g., iOS 10 67 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 68
Playing Back on multiple devices (AirPlay2) Playback Wi-Fi iPhone Onkyo TX-NR5100 XXXXXX Onkyo XXXXXXXX Onkyo XXXXXXXX e.g., iOS 11.4 This unit supports AirPlay2. If the version of the iOS device is iOS11.4 or later, you can play the tracks on the iOS device simultaneously on this device - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 69
as a music streaming distribution service is displayed. Select the content to play, and perform operation according to the on-screen instructions. • When "5. Hardware" - "Power Management" - "Network Standby" is set to "Off" in the Setup menu, turn this unit on manually, and press the NET button - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 70
menu, tap the "amazon alexa" icon. • If the login screen is not displayed but an update or installation screen is displayed instead, perform the update or installation according to the onscreen instructions. Available services may differ depending on your area. 4. Tap "Start Setup", and in the - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 71
Alexa. 7. When registration is finished, the screen returns to the one for Onkyo Controller. Follow the on screen instructions and talk to the terminal with Amazon Alexa (an Amazon Echo, etc.), and confirm that you can use voice commands. For example: "Alexa, raise the volume of the speaker - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 72
If the login screen is not displayed but an update or installation screen is displayed instead, perform the update or installation according to the onscreen instructions. Available services may differ depending on your area. 4. Enter the Amazon account information such as email address and password - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 73
Music using the Onkyo Controller 1. Start up Onkyo Controller. This unit is automatically displayed after startup. Then, tap and select this unit displayed. 2. Tap "NET" or "NETWORK" on the upper part of the screen to switch to the network screen. Then tap the "Amazon Music" icon. 3. Select the - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 74
instead, perform the update or installation according to the onscreen instructions. Registering this unit with TIDAL allows you to enjoy the music distribution service provided by TIDAL. You can register this unit on the screen of Onkyo Controller by downloading Onkyo Controller (available on - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 75
. • A digital cable can also be connected. For details, refer to the instruction manual of Sonos. • You can change the name of the input selector displayed on Source" - "Name Edit" and then change the name. Setting Up A setup is required to play Sonos on this unit. Make the setting according to the - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 76
cannot find the Sonos Connect to be interlocked, return to the previous screen, turn off the product you do not want to interlock, and try again. Preset Volume: You can set the volume beforehand for playing back the Sonos Connect in the main room (where this unit is located). Select a value from " - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 77
NET will display the Network Functions list screen on the TV. 3. Select your preferred Internet radio service using cursor, and press ENTER to confirm the selection. 4. Following the on-screen instructions, select a radio station and program using cursor, and then press ENTER to play. • To return to - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 78
Menu You can bookmark specific stations, or delete stations that have been bookmarked. The displayed menu varies according to the service being selected. The menu icon is displayed while a station is being played. When only this icon is displayed, pressing ENTER will display the menu on - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 79
BLUETOOTH button and perform playback operation. 4. Perform the playback operation of the AV component such as a Blu-ray Disc player. To play the audio of NET Mini Player. The setting for Mini Player can be changed on the Setup Menu so that it automatically turns off in 30 seconds after displayed. - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 80
Between 5 kbps and 320 kbps, and VBR • WMA Pro/Voice/WMA Lossless formats are not supported. WAV (.wav) WAV files contain uncompressed PCM digital audio. • 44.1 kHz, 48 kHz mass storage class standard. Also the format of USB storage devices supports FAT16 or FAT32 file system format. • If the USB - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 81
your USB storage device with the music files into the USB port on the rear panel of this unit. 3. Press NET to display the network service list screen. 4. Select "USB" with the cursors, and then press ENTER. • If the "USB" indicator blinks on the display, check whether the USB storage device - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 82
the playback time may not be displayed correctly. • This unit supports the gapless playback of the USB storage device in the following conditions Apple Lossless files with the same format, sampling frequency, the number of channels and quantization bit rate. • To display an album title, artist name - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 83
registered in the library of Windows Media® Player can be played. Supported Audio Formats Windows Media® Player 12 settings MP3 (.mp3) • kbps and 320 kbps, and VBR • WMA Pro/Voice/WMA Lossless formats are not supported. WAV (.wav) WAV files contain uncompressed PCM digital audio. • 44.1 kHz, 48 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 84
to play. 3. Make sure that the PC or NAS is properly connected to the same network as this unit. 4. Press NET to display the network service list screen. • If the "NET" indicator on the display blinks, the unit is not properly connected to the network. Check the connection. BNB[POBMFYB - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 85
correctly. • For music files on a server, up to 20,000 tracks per folder are supported, and folders can be nested up to 16 levels deep. • Depending on the type of in the following conditions. - It is using a network service. - It is playing a music file on a USB storage device. • Remote play of FLAC and - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 86
Queue information is effective until the power cord of this unit is removed from the outlet. Refer to "Onkyo Controller" ( →p120) for information about the app. Adding Play Queue Information 1. Select the "INPUT" "NET" input, tap the "Play Queue" icon, and enter the Play Queue service screen. 86 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 87
track from Play Queue. Playing Back Playback starts when you select "Play Now " for Play Queue addition, or select the track in the Play Queue service screen. Playback 87 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 88
of the main unit light up. On (B): Outputs audio only from ZONE B. "B" on the display of the main unit lights up. 3. Start play on the AV component. 4. Adjust the volume on the transmitter, etc., in ZONE B. • If "On (A+B)" is selected as an audio output destination, you can select only the "Stereo - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 89
Setup Setup Menu Web Setup Initial Setup with Auto Start-up Wizard Onkyo Controller Setup 90 116 117 120 89 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 90
TV to make the settings. Press on the remote controller to display the Setup menu. Select the item with the cursors / of the remote controller, press . • To exit the settings, press the button. Menu list Setup SetuSpetup 1. Inpu1t./IOnpuutpt/uOtuAtpsustigAnssign 1. T1V. TOVuOt u/ tO/ SODSD 2. - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 91
to connect with the Sonos Connect. Change the settings for Tuner. Change the remote controller ID. Change the settings for Firmware Update. Make the initial setup from the setup menu. Lock the Setup menu so that the settings cannot be changed. All the settings are restored to factory defaults - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 92
Setup Upscaling (Default Value: Off) When a TV supporting 4K is used, video signals input with 1080p can be automatically output with 4K. • If the TV does not support of 4K resolution supported by the TV, and change the resolution of the video signals input from the AV component. Off Auto - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 93
(4K 30Hz, etc.) When using a Premium High Speed HDMI Cable that supports 18 Gbps to connect a TV or player compatible with highdefinition 4K signal formats connect a TV or player compatible with 4K/120p or 5K, 8K signal formats Setup OSD Language (Default Value: English) Select the on-screen - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 94
Saver (Default Value: 3 minutes) Set the time to start the screen saver. Select a value from "3 minutes", "5 minutes", "10 minutes" and "Off". Setup 2. HDMI Input You can change input assignment between the input selectors and HDMI IN jacks. BD/DVD (Default Value: HDMI 1 (HDCP 2.3)) GAME - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 95
the COAXIAL terminal or OPTICAL terminal to any input selector. • Supported sampling rates for PCM signals (stereo, mono) from a digital input kHz, 48 kHz, 88.2 kHz, 96 kHz/16bit, 20bit, and 24bit. Setup 4. Analog Audio Input Change input assignment between the input selectors and AUDIO IN - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 96
. • This setting cannot be selected when "Speaker Channels" is set to "6.1 ch", "7.1 ch", "4.1.2 No" when "Bi-Amp" is set to "Yes". Setup Zone B Output Level (Default Value: Fixed) When on the back of the speakers or their instruction manual. 4ohms When any of the connected speakers have - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 97
and the low pitched range of the other channels is output from the front speakers. Refer to the instruction manual of your speakers to make the setting. Center setting in "Configuration" - "Speaker Channels" matches the number of connected channels. Setup Surround Back: Select the crossover - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 98
Left, Height Right): • This setting cannot be changed when "Configuration" - "Speaker Channels" is set to "4.1.2 ch" or "5.1.2 ch", and the audio output destination audio output destination is set to "On (A+B)" or "On (B)". Setup 4. Level Calibration Adjust the volume level of each speaker. - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 99
enhance the reflection effect of Dolby Enabled Speakers from the ceiling. Off When this function is not used On When this function is used Setup 6. Equalizer Settings You can adjust the output volume of the range for each connected speaker. Adjust the volume of different sound ranges for - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 100
Listening modes such as T-D that have virtual speaker effects can be selected. Off Listening modes such as T-D that have virtual speaker effects cannot be selected. Setup 100 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 101
when playing back analog or 2 ch PCM signals in the Mono listening mode. Left Right Left + Right Left channel only Right channel only Left and right channels Setup 2. Dolby Change the setting of when Dolby signals are input. Loudness Management (Default Value: On) When playing Dolby TrueHD - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 102
this function is used Off Audio is played using the same amount of channels in the input signal according to the speaker configuration of this unit. than DTS:X. • Depending on the content, this function may not be selected. Setup 4. LFE Level Set the low-frequency effect (LFE) level for Dolby - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 103
cannot be set if the "NET" or "BLUETOOTH" input is selected. Setup Audio Select Select the priority for input selection when multiple audio sources can be selected only when "5. Hardware" - "HDMI" - "Audio Return Channel (eARC supported)" is set to "On" and also the "TV" input is selected. When - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 104
Default Value: Off) Select whether to fix input signals to PCM (except multi-channel PCM) when you select "HDMI", "COAXIAL", or "OPTICAL" in the " cannot be changed when "TUNER", "NET", or "BLUETOOTH" input is selected. Setup Video Select When "TUNER", "NET", or "BLUETOOTH" input is selected, - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 105
Off". On When this function is used Off When this function is not used Setup HDMI Standby Through (Default Value: Auto (Eco)) When this is set can switch the input of the unit using the remote controller or the Onkyo Controller even in the standby mode. Select one of these settings when you - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 106
CEC setting is off on the TV, there may be audio output from both the TV speakers and the speakers of this unit. Setup Audio Return Channel (eARC supported) (Default Value: On) You can enjoy the sound of an HDMI-connected ARC-compatible TV or eARCcompatible TV through the speakers connected to - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 107
• When switching between "On" and "Off(Wired)", stop the Network service. Also, when group playback is in process, cancel the group playback once component and cannot be changed. Setup DHCP (Default Value: Enable) Enable Disable Auto configuration by DHCP Manual configuration without DHCP • If - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 108
whether or not to use the AirPlay function. On When this function is used Off When this function is not used Setup AirPlay Device Name (Default Value: Onkyo TX-NR5100 XXXXXX) Change the model name of this unit which is displayed on the AirPlayconnected device to an easily recognized name - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 109
App. Privacy Statement (Default Value: Not Accepted) When using a network service that requires a login name, email address, password, etc., you need to Accepted" is selected, you will log out from the network service you have logged in. Setup Network Check (Default Value: -) You can check the - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 110
Receiver) Bluetooth Receiver (Default Value: On) Select whether or not to use the function that receives When this function is not used Setup Pairing Information (Default Value: refer to the instruction manual of the BLUETOOTH enabled devices. On (Tx) On (Main + Tx) Off When this function - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 111
enabled device and this unit. • The codec of the receiving device must be compatible with aptX HD. On When used Off When this function is not used Setup Pairing Information (Default Value: -) You can refer to the BLUETOOTH enabled device's instruction manual. Device (Default Value: -) - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 112
"HDMI Standby Through" are set to "Off". Off The setting will be disabled. Setup USB Power Out at Standby (Default Value: Off) Devices connected to the USB on the power of the unit via network using an application such as Onkyo Controller that can control this unit. • When this function is set - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 113
also fixed to "Off" if "Bluetooth" - "Bluetooth Receiver" - "Auto Input Change" is set to "Off". • Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It can be selected when the network function is activated. Setup 5. Works with SONOS Change the settings to connect - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 114
"10 kHz/0.2 MHz" or "9 kHz/0.05 MHz". • When this setting is changed, all radio presets are deleted. Setup 2. Remote ID Change the remote controller ID. Remote ID (Default Value: 1) If multiple ONKYO products are installed in the same room, select the ID for the remote control used with this - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 115
in the USB storage device. • Wait for a while if "Firmware Update" cannot be selected. It can be selected when the network function is activated. 4. Initial Setup Make the initial setup from the setup menu. • Wait for a while if "Initial Setup" cannot be selected. It can be selected when the - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 116
browser. Setup 6. After changing the settings, select "Save" to save the settings. Device Information You can change the Friendly Name or AirPlay Device Name, set an AirPlay Password, etc. Control4: Register this unit if you are using a Control4 system. Firmware Update: Select the firmware file - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 117
TV's REMOTE INPUT TV Inputs TV HDMI 1 HDMI 2 HDMI 3 When you turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings required for startup using simple operations following on-screen guidance. 1. Switch the - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 118
screen, press ENTER, and then follow the onscreen instructions. Setup Keyboard Input To switch between upper and lower cases select the number of channels in "Speaker Channels". 1 Speaker Setup 2 3 4 5 6 Speaker Channels 7.1 ch < > problem with the speaker connection, select "Next" and press ENTER. - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 119
have connected a TV that supports ARC, select "Yes" and press ENTER. 3. AccuEQ Room Calibration Place the supplied speaker setup microphone at the listening The measurement results in step 3 are displayed. If there is no problem in the detection result of the speaker, select "Next" and press - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 120
internet radio services (TuneIn Radio, etc.) and selecting stations. Control in the palm of your hands without looking at the TV. • Play the music files saved on the mobile device via Wi-Fi. • Play Amazon Music (compatible models only) ( →p72) Setup Initial Setup 1. Download the Onkyo Controller - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 121
is operating erratically 123 Try restarting the unit 123 Resetting the unit (this resets the unit settings to the default) 123 Troubleshooting 124 Power 124 Audio 124 Listening Modes 126 Video 127 Linked operation 128 Tuner 129 BLUETOOTH function 129 Network - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 122
Troubleshooting Before starting the procedure Problems may be solved by simply turning the power well. After reconnecting, turn off and on the unit and the connected device. • The AV receiver contains a microPC for signal processing and control functions. In very rare situations, severe interference - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 123
If the problem persists after restarting the unit, unplug and plug the power cords or HDMI cable of this unit and connected devices. Troubleshooting the unit during the Initial Setup process. Before doing the following procedures, press to exit Initial Setup. 1. While pressing and holding - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 124
Troubleshooting Troubleshooting Management" - "Auto Standby" on the Setup menu is activated, the unit automatically enters our company's support. Audio • Make sure that the speaker setup microphone is no - "Audio Select" - "PCM Fixed Mode" on the Setup menu is set to "On", audio is not played if - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 125
Troubleshooting No sound from the TV • Change the input selector on this unit to the position of the terminal to which the TV is connected. • If the TV does not support environment need to be made in "Speaker Setup" in Initial Setup. Check "Initial Setup with Auto Start-up Wizard" ( →p117 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 126
Troubleshooting Noise can be heard • Using cable ties to bundle audio pin cables, power cords, speaker cables, etc. may degrade the audio quality. Do not bundle the cords. • An audio cable may be picking up interference. Change the position of the cables. The beginning of audio received problem - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 127
channel audio may be output from the surround back speakers. • Some Dolby Atmos audio format that is used on games, etc., may be recognized as "Multichannel PCM". If this occurs, check the firmware updates as a TV. Check the following if the problem persists after you have confirmed the above. No - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 128
jack is not displayed. In this case, the TV does not support the resolution of the video input from the player. Change the Setup menu of the unit, set "5. Hardware" - "HDMI" - "HDMI CEC" to "On". • It is also necessary to set HDMI linking on the CEC-compliant device. Check the instruction manual - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 129
Troubleshooting effective. • BLUETOOTH enabled devices must support the A2DP profile. • Because a radio . Check the following if the problem persists after you have confirmed the Setup menu, select "5. Hardware" - "Bluetooth" - "Bluetooth Receiver" enabled device's instruction manual. Finally, perform - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 130
Troubleshooting Cannot transmit from this unit to a Bluetooth wireless technology enabled device (wireless headphones, etc.) • Check that the "Bluetooth Transmitter" setting on this unit is set to either "On(Tx)" or "On(Main + Tx In the Setup menu, instruction manual /Receive maybe a problem with - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 131
Troubleshooting Network function • If you cannot select a network service problem persists after you have confirmed the above. Cannot access the Internet radio • In the case the service provider has terminated the service, the network service you are using are supported by your ISP. Cannot - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 132
receive power from the USB port of the unit is not guaranteed. • Depending on the type of content, the playback may not be performed normally. Check the types of supported following if the problem persists after you have confirmed switched to Manual. Restore the setting to Auto. • Try the manual set-up. - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 133
Troubleshooting Playback sound is interrupted, or communication is not possible • You may not receive radio waves due to poor can avoid those problems by changing the channel of your wireless LAN router. For instructions on changing channels, refer to the instruction manual supplied with your - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 134
Troubleshooting Others Strange noise can be heard from the unit • If the measurement results. If this is the case, make the settings in "2. Speaker" - "Distance" in the Setup menu. The measurement results of AccuEQ Room Calibration show that the volume level of the subwoofer has been corrected - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 135
Appendix Appendix Speaker Layouts and Selectable Listening Modes 136 LISTENING MODE buttons and Selectable Listening Modes 139 Input Formats and Selectable Listening Modes 141 Listening Mode Effects 145 Speaker combinations 150 General Specifications 151 135 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 136
Speaker Layouts and Selectable Listening Modes See the following table for selectable listening modes for each speaker layout. Listening mode Speaker layout (ch) 2.1 3.1 4.1 DD (Dolby Audio - DD) (*1) (*1) DD+ (Dolby Audio - DD+) (*1) (*1) DTHD (Dolby Audio - TrueHD) (*1) (*1) Atmos - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 137
Appendix Listening mode Speaker layout (ch) 2.1 3.1 4.1 5.1 6.1 7.1 2.1.2 3.1.2 4.1.2 5.1.2 DTS (*3) (*3) (*3) ES Discrete (DTS-ES Discrete) ES Matrix (DTS-ES Matrix) DTS 96/24 (*3) (*3) (*3) DTS-HD HR (DTS-HD High Resolution) DTS-HD Master (DTS-HD Master Audio) DTS Express - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 138
of input signals. *2: If 4.1ch or 5.1ch Dolby signals (DD, DD+, DTHD) are input, surround channel audio is output from the surround back speakers. *3: Not output from height speakers. *4: N ot output from surround back speakers. *5: Output only from front speakers. *6: Output - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 139
LISTENING MODE buttons and Selectable Listening Modes Refer to the following table for the listening modes that can be selected with each listening mode button. Listening mode DD (Dolby Audio - DD) DD+ (Dolby Audio - DD+) LISTENING MODE buttons MOVIE/TV MUSIC GAME Listening mode DTS ES Discrete - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 140
Listening mode Orchestra Unplugged Studio-Mix TV Logic Unplugged Game-RPG Game-Action Game-Rock Game-Sports AllCh Stereo Mono Music T-D (Theater-Dimensional) LISTENING MODE buttons MOVIE/TV MUSIC GAME Appendix 140 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 141
Pure Audio Direct Stereo DD (Dolby Audio - DD) (*2) DD+ (Dolby Audio - DD+) (*2)(*3) DTHD (Dolby Audio TrueHD) (*2) Atmos (*12) DSur (Dolby Audio - Surr) (*12) 2-channel signal input Analog / PCM Music file / DSD (*1) DD / DD+ / DTHD DTS / DTS 96/24 / DTS Express / DTSHD HR / DTS-HD MSTR Multi - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 142
input Analog / PCM Music file / DSD (*1) DD / DD+ / DTHD DTS / DTS 96/24 / DTS Express / DTS-HD HR / DTS-HD MSTR Multi-channel signal input Multich PCM DSD (*1) DD DD+ DTHD ATMOS DTS DTS 96/24 DTS Express DTS-HD HR DTS-HD MSTR DTS-ES Discrete (*4) DTS- - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 143
input Analog / PCM Music file / DSD (*1) DD / DD+ / DTHD DTS / DTS 96/24 / DTS Express / DTS-HD HR / DTS-HD MSTR Multi-channel signal input Multich PCM DSD (*1) DD DD+ DTHD ATMOS DTS DTS 96/24 DTS Express DTS-HD HR DTS-HD MSTR DTS-ES Discrete DTS- - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 144
back speaker is connected. (*5) S urround back speakers need to be installed. (*6) If the input format is any of the following and the number of channels is monaural, this listening mode becomes unavailable. - DTS, DTS 96/24, DTS Express, DTS-HD HR, DTS-HD MSTR, PCM, music file (*7) Surround - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 145
Digital Plus is an optional audio format based on 5.1 ch for Blu-ray Discs. It is possible to record a maximum of 7.1 channels with additional channels such as the surround back channel. • To enable transfer of this audio format, connect via an HDMI cable and set the audio output on the player to - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 146
Discs. It is possible to record a maximum of 7.1 channels with additional channels such as the surround back channel. 7.1 ch is recorded at 96 kHz/24 bit, and is suitable for playing sources recorded in DSD. • This unit supports the DSD signal input from the HDMI input terminal. However, depending - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 147
is an optional audio format based on 5.1 ch for Blu-ray Discs. It is possible to record a maximum of 7.1 channels with additional channels such as the surround back channel. It also supports low bit rates. • To enable transfer of this audio format, connect via an HDMI cable and set the audio output - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 148
is an optional audio format based on 5.1 ch for DVD-Video and Blu-ray Discs. It is possible to record a maximum of 6.1 channels with a monaural surround back channel added. • To enable transfer of this audio format, connect via a digital cable and set the audio output on the player to Bitstream - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 149
T-D (Theater-Dimensional) In this mode, you can enjoy a virtual playback of multichannel surround sound even with only two or three speakers. This works by controlling how sounds reach the listener's left and right ears. • This mode cannot be selected when "Speaker Virtualizer" ( →p100) is set to - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 150
Speaker combinations Appendix • Up to two powered subwoofers can be connected in either combination. Speaker Channels FRONT CENTER SURROUND 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch 7.1 ch 2.1.2 ch 3.1.2 ch 4.1.2 ch 5.1.2 ch SURROUND BACK HEIGHT (*2) (*2) Bi-AMP (*1) (*1) (*1) (*1) ZONE B (ZONE - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 151
Tone Control Characteristics Signal to Noise Ratio Speaker Impedance Headphone Rated Output Supported impedance of Headphones Headphones Frequency Response With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 80 watts per channel minimum RMS power, with no more than 0.08% total harmonic - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 152
Frequency Range 50 dB quieting sensitivity (FM MONO) AM Tuning Frequency Range Preset Channel BLUETOOTH Section Communication system Frequency band Modulation method Compatible BLUETOOTH profiles Supported Codecs Transmission range (A2DP) Maximum communication range 87.5 MHz - 107.9 MHz 1.0 μV, 11 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 153
8K/60p 4:4:4 2.1 24Gbps 8K/24p 4:2:0 8K/60p 4:4:4 2.1 24Gbps 8K/24p 4:2:0 8K/60p 4:4:4 2.1 24Gbps 2.1 24Gbps 8K/24p 4:2:0 8K/60p 4:4:4 8K/24p 4:2:0 8K/60p 4:4:4 *1 Audio Format: 2 ch linear PCM (32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit) Multi-channel - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 154
48/50/60 Hz YCbCr4:2:0 8/10/12 bit (*2) (*2) YCbCr4:2:2 12 bit YCbCr4:4:4/RGB 8 bit 10/12 bit (*1) 8K 24/25/30 Hz YCbCr4:2:0 8/10/12 bit (7680x4320p) YCbCr4:2:2 12 bit (*1) YCbCr4:4:4/RGB 8/10 bit (*1) 12 , via HDMI. (*2)5K, 48Hz, YCbCr4:2:0, 8/10/12 bit is not supported. 154 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 155
of April 2020) Toshiba brand televisions; Sharp brand televisions; Onkyo and Integra brand RIHD-compatible players; Toshiba brand players and (10BASE-T/100BASE-TX) Wireless LAN IEEE 802.11 a/b/g/n/ac standard (Wi-Fi® standard) 5 GHz/2.4 GHz band ■Music Server ( →p83) Supported Audio Formats MP3 - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 156
USB Section ■USB Storage Device ( →p80) Supported Audio Formats General Power Supply Power Consumption Full 48 kHz/Between 5 kbps and 320 kbps, and VBR • WMA Pro/Voice/WMA Lossless formats are not supported. WAV (.wav) WAV files contain uncompressed PCM digital audio. • 44.1 kHz, 48 kHz, 88.2 kHz - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 157
Standby mode (ALL ON) Equipment with HiNA functionality Standby mode, Network disconnect and Network Standby ON Dimensions (W × H × D) Weight Composite Component Video Section Analog Digital Audio Inputs Appendix 1.7 W 2.6 W This equipment complies with European Commission Regulation (EC) No - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 158
LINE OUT (ZONE B) × 1 PRE OUT (SUBWOOFER) × 2 7 (FRONT L/R, CENTER, SURROUND L/R, HEIGHT L/R or SURROUND BACK L/R or ZONE B L/R) • FRONT L/R terminals support banana plugs. 1 (ø 6.3 mm, 1/4") Others Setup Mic RS-232 12V TRIGGER OUT IR Specifications and features are subject to change without notice - Onkyo TX-NR5100 7.2-Channel 8K AV Receiver | Instruction Manual - English - Page 159
SN 29403953_EN © 2021 Onkyo Home Entertainment Corporation. All rights reserved. ©2021 Onkyo Home Entertainment Corporation, Tous droits de reproduction et de traduction réservés. https://www.onkyo.com/privacy/ H2104-0
En
AV RECEIVER
TX-NR5100
Instruction Manual